RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   blow off valve problem? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/blow-off-valve-problem-851070/)

r1fdtres 07-10-09 10:05 PM

blow off valve problem?
 
I don't know what wrong with my blow off valve it start to make a complete diferent sound I could say almost not to much sound I have hks SSQV, what could be wrong?

Prometheus 07-10-09 10:45 PM

are you noticing any loss of power, or strange idle?

Your diaphram could be failing.

Look into the synapse engineering BOV's if this one is on it's way out (synapse uses solid design, no diaphram to fail)

r1fdtres 07-11-09 09:32 AM

the idle is normal, (Your diaphram could be failing) don't understand what u saying, u mean the blow off valve is done (broke):dunno:

1QWIK7 07-11-09 09:51 AM

The diaphram in the blow off valve itself.

Thats why the other guy was asking if your have strange idle issues, because it might be leaking under idle (if the diaphram was broken).

I have the HKS ssqv myself. Make sure the vaccum line isnt pinched. That happened to be before.

I ran a LONG line from the UIM to the HKS bov i cant remember why and i guess the way i routed it, it was pinched a bit and i had no boost. The car felt really slow lol. The hose to the ypipe was also loose too so that might have contributed to that.

I cut it in half and just ran it direct. Now the vacuum line has no turns, its just straight from the UIM to the bov.

r1fdtres 07-11-09 08:52 PM

thanks for the info

so there is no chance that bow off valve is damage?

Originally Posted by 1QWIK7 (Post 9350155)
The diaphram in the blow off valve itself.

Thats why the other guy was asking if your have strange idle issues, because it might be leaking under idle (if the diaphram was broken).

I have the HKS ssqv myself. Make sure the vaccum line isnt pinched. That happened to be before.

I ran a LONG line from the UIM to the HKS bov i cant remember why and i guess the way i routed it, it was pinched a bit and i had no boost. The car felt really slow lol. The hose to the ypipe was also loose too so that might have contributed to that.

I cut it in half and just ran it direct. Now the vacuum line has no turns, its just straight from the UIM to the bov.


r1fdtres 07-13-09 04:24 PM

something:dunno: is wrong only boost 5 I have set up 11 I can't find the problem.......


All times are GMT -5. The time now is 01:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands