Alright am not trying to get alittle attitude or anything..but f**k why won't you just get a f**ken jammer?? Going at high speeds cops wont be able to catch you..100% guranteed
|
ps..why you trying to hide your plate for? hah I think it's worthless and don't take it up the as*.
Injen |
Originally Posted by INJEN 7
Alright am not trying to get alittle attitude or anything..but f**k why won't you just get a f**ken jammer?? Going at high speeds cops wont be able to catch you..100% guranteed
|
INJEN 7,
You should research a little what "Blockoff Plates" are.... They are not to "Block off the license plate". They are plates designed to fit over areas onto manifolds (and other parts) to enable people to remove equipment they aren't using. For instance, people removing the airpump can also remove parts like the ACV. This will leave a huge hole in the Lower Intake Manifold, so you use a "Blockoff Plate" to cover up the hole where the ACV used to be. |
Originally Posted by GoodfellaFD3S
I want to say the bolts you will need are M6x1.0, but my memory sometimes plays tricks on me ;)
for the lazy ones, yes they are M6 with a 1.0 pitch.... |
Thanks guys, but rather than using washers on the studs, I'm going to increase the thickness of the BOP. Does anyone have an ACV off their car that they can measure the thickness of the bolt flange? I really want to make these BEFORE removing stuff.
Also, couldn't I just use the old metal gasket or buy some gasket material and cut out a gasket rather than use silicone or Permatex Ultra Gray? INJEN 7 :weed: |
Bump
|
1 Attachment(s)
HDP, I used 1/8" aluminum. Almost all of the fasteners/studs in the IM are M6x1.0. If you need a hand, let me know, I'm up in HSV.
|
Originally Posted by broken93
HDP, I used 1/8" aluminum. Almost all of the fasteners/studs in the IM are M6x1.0. If you need a hand, let me know, I'm up in HSV.
But is there any way you can measure the bolt flange on you ACV? I want to use the studs and I need to know how thick to make the BOP. Thanks. |
Yeah, I can do that. I'll post back when I get home tonight.
I've yet to meet anyone in the area. Apparently I'm living under a rock (I mean, living under my FD). |
Originally Posted by broken93
I've yet to meet anyone in the area. Apparently I'm living under a rock (I mean, living under my FD).
|
That flange is 12mm thick.
|
Originally Posted by broken93
That flange is 12mm thick.
|
All times are GMT -5. The time now is 07:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands