RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Back together now beeping! (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/back-together-now-beeping-534524/)

ShogunOfHarlem 04-27-06 09:28 PM

Back together now beeping!
 
Well I got the dash and most of the car back together. When I start up the car i get the sequence of beeping. Is there a faq on how to interpret these? When I turned the car off and started it again no beeps. Is there a way to check to see what this was?

Any help would be great. I did a search but to be honest searching on "beeping" did not yield much.

Thanks,
-Bill

onefast3gen 04-28-06 05:39 AM

sounds like the air bag warning light is out.

ShogunOfHarlem 04-28-06 09:22 AM

Is that one of the light in the instrument cluster? I noticed that the 2 wire connector on top of the steering column was out and I plugged it back in. I don't know what those 2 little wires are for but hopefully it helps solve the problem.

Thanks,
-Bill

TMadlem84 04-28-06 12:25 PM

Don't know if disconnected airbag wires caused beeps, I didn't think they did... what was causing my beeps was the bulb itself that is for the airbag warning light. The bulb probably got shook lose or broke when you pulled the dash, so pull the dash again, & reach around & check the airbag light.

ShogunOfHarlem 04-28-06 01:01 PM

i am waiting on a new gauge hood from Ray so the gauges are just hanging out this should be easy to look at once I get home. In case it is the bulb does anyone know the siz/voltage that I need to replace it? Can i get these at the local parts store?

thanks

TMadlem84 04-28-06 03:12 PM

If you're desperate... you can pull a bulb from the seatbelt light to use. The seatbelt light is useless anyways... & it doesn't give you any warning sounds that the bulb is gone.

ShogunOfHarlem 04-28-06 05:12 PM

Well I am home and checked it out and the air bag light is coming on. Also I no longer am getting the beeping sound. Maybe the filament is bad but touching so that the warning is not sounding. I will replace the bulb for good measure.

thanks for the help


All times are GMT -5. The time now is 02:31 AM.


© 2024 MH Sub I, LLC dba Internet Brands