RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Apexi N1 ExTi 4in exhaust (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/apexi-n1-exti-4in-exhaust-1010647/)

LongRX7 09-05-12 02:41 AM

Apexi N1 ExTi 4in exhaust
 
Just got my CYM back from Rotary Inspired Performance. I had Brad fab a 4 inch piping from the DP back to the Apexi Titanium exhaust. Wow, in my opinion, it sounds really great :) A deeper tone and not raspy. I'm super happy with it. Next project will be to single it and finish off the exhaust with a 4 in downpipe :D

http://i189.photobucket.com/albums/z...4ApexiExTi.jpg

ZE Power MX6 09-06-12 01:03 AM

So just a straight 4" no resonator midpipe or cat? Video!

Turbo II FC 09-06-12 10:29 AM

Looks pretty good but I think 4" straight is overkill.

LongRX7 09-11-12 11:46 PM

Right now 4 in from down pipe back(DP is 3 in for now). No resonator, no high flow cat. I'll try to get a vid of it this weekend. Overkill...no such thing :)

zman600 09-14-12 10:35 AM

i was about to do the exact same thing. (but im single turbo)

please post video for us!
thanks alot

LongRX7 09-16-12 04:17 PM

Efini twins currently but I have a GT42R waiting to go on it. Hopefully start the build this fall after my bro and friend at Hyperspeed Motosports gets done with the Supras for the TI event in October. Here's a vid, taken from my iPhone, so not like super pro or anything... :)

Hold a few mins, had to upload vid to youtube, couldn't get it to embed from photobucket like pictures...

LongRX7 09-16-12 05:45 PM

Here y'all go.... hehe sorry for the gratuitous quick walk around :)


Farkel 09-16-12 10:53 PM

Until you go single, how are you going to control the boost creep? Or do you already have a ported wastegate?

The fab work looks nice, but I think the canister protrudes past the bumper quite far. Especially with the ExTi, the tip itself is adjustable...

LongRX7 09-17-12 12:16 AM

Wastegate is slightly ported, currently using a Blitz DSBC to control boost. It does protrude a little further than I would like after looking at it. That's an easy fix later, when we do the build to 4 inch from the turbo back.

audoetuk 09-27-12 02:41 AM

Should prob keep the tip where it is, maybe even a lil further, don't wanna melt ya bumper

zman600 09-27-12 08:17 PM

sounds not as load as i thought it was gonna be.... kinda normal actually hmm

LongRX7 09-28-12 10:46 AM


Originally Posted by audoetuk (Post 11236343)
Should prob keep the tip where it is, maybe even a lil further, don't wanna melt ya bumper

That's why I had the tip there, but I'm not sure still. Might change it during build, then might not....I dunno


Originally Posted by zman600 (Post 11237170)
sounds not as load as i thought it was gonna be.... kinda normal actually hmm

It really isn't. It's a deeper sound. My 3in Blitz Nur Spec was way louder. Really one of the best RX-7 exhaust sounds. Maybe it's due to the Ti muffler...? I love the way it sounds :) But that's just my opinion.

ZE Power MX6 09-28-12 11:30 AM

Sounds really good, does it gets a lot louder when you get on it? I think the Titanium does change an exhaust tone a bit, I had a Titanium muffler on my MX-6 turbo back and it sounded different than any other boosted KL.

I can't wait to put on my Ganador Ti :)

The_Fox 09-28-12 01:06 PM

Goddamn that sounds awesome.

Sent from my iPhone using RX7Club


All times are GMT -5. The time now is 02:24 PM.


© 2024 MH Sub I, LLC dba Internet Brands