Apexi BOV gone bad?
Ok so I have the Greddy Elbow with an Apexi BOV mounted to it. When I installed it I removed the stock BOV and ran the Apexi vacuum line to the nipple on the UIM where the stock BOV use to go. All I hear is air rushing thru the Apexi BOV while on throttle. I know that's not supposed to happen and I should only hear air off throttle. So is the Apexi bad? If so, if I want to put the stock BOV back on and vent it to air do I need to put the stock elbow back on since the Apexi is mounted to the Greddy Elbow or can I just leave the Apexi mounted but not hooked up to any vacuum line? Thanks - Brad
|
