RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Anyone wideband a Pettit unlimited ecu? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/anyone-wideband-pettit-unlimited-ecu-264559/)

Tim Benton 01-25-04 07:27 PM

Anyone wideband a Pettit unlimited ecu?
 
Just curious what A/F's a person sees with this ecu. Is it in the 10's, low 11's, etc and what mods? If it's extremely rich, then a S-afc could be used to dial some of the fuel out and make a little more HP and still be safe.

Tim

Mahjik 01-25-04 07:33 PM

Here's about the only A/F info I've seen for the Pettit so far:

https://www.rx7club.com/showthread.p...hreadid=259617

Tim Benton 01-25-04 07:50 PM

thanks, I must have missed that thread.

Tim

crazyrx7 01-25-04 07:51 PM

My question is if you are running rich enough at 14.7 psi can you turn up the boost another psi and be safe? Also a little off topic; will the pettit ecu and m2 ecu support a single turbo or do you have to go stand alone (power fc etc...). Sorry if its a stupid question.

R.K.

Grrrlpwr 01-25-04 08:12 PM

https://www.rx7club.com/showthread.p...hreadid=259617
these dyno runs were using a pettit unlimited, check sign for mods

books 01-25-04 08:38 PM

here's another dyno
http://www.silverbulletrx7.com/dyno.html

skotx 01-25-04 09:43 PM

Another for ya...

This was at 10 psi, dp, cat back, intake, fmic, stock motor, turbos, cat, and fuel. Tail-pipe a/f probe. Disregard green run as probe had come out. Power sucks because previous owner had cut the CRV wire at the ECU. :rolleyes:


All times are GMT -5. The time now is 11:59 PM.


© 2024 MH Sub I, LLC dba Internet Brands