Anyone ever install a RX-7 Fashion or Turbo Streetfighter FMIC?
If so I have a few questions for you. How did you remove the metal bar from behind the bumper re-bar? Can I just drill out the spot welds? Where did you mount the passenger side horn and the 2 flat sensors (airbag crash sensors?). What did you use to trim the bumper with? TIA!
Anyone? Here are some pics if they help:
Left horn and sensor - http://jrx7.rx7life.com/imagepages/fmicimage4.htm
Right horn and sensor - http://jrx7.rx7life.com/imagepages/fmicimage5.htm
Feel free to peruse through the rest of the pics here - http://jrx7.rx7life.com/fmicpics.htm
Left horn and sensor - http://jrx7.rx7life.com/imagepages/fmicimage4.htm
Right horn and sensor - http://jrx7.rx7life.com/imagepages/fmicimage5.htm
Feel free to peruse through the rest of the pics here - http://jrx7.rx7life.com/fmicpics.htm
No not yet, just got the bumper and and stock IC out. I haven't figured out the best way to get it off yet. I think I'll try to drill holes through the spot welds and if that doesn't work then I'll try using a cut off disk on my drill. I was hoping someone else had already installed one and would have some advice.
Originally posted by FourtyOunce
i like the intercooler, but anything that requires modification to the frame of the car is a no no. why did you choose that ic instead of a Greddy unit or Apexi?
i like the intercooler, but anything that requires modification to the frame of the car is a no no. why did you choose that ic instead of a Greddy unit or Apexi?
Joined: Oct 2001
Posts: 4,772
Likes: 2
From: My 350Z Roadster kicks my RX7's butt
I've been looking at those also
Too bad XS doesn't sell their version anymore. 
The RX7fashion uses a Apexi core intended for the Skyline GT-R and the TSF uses a Spearco core. Does anyone know which core has better flow, less pressure drop and handles more boost?
Which one did you choose? I can't tell by the picture you posted.

The RX7fashion uses a Apexi core intended for the Skyline GT-R and the TSF uses a Spearco core. Does anyone know which core has better flow, less pressure drop and handles more boost?
Which one did you choose? I can't tell by the picture you posted.
Trending Topics
Re: I've been looking at those also
Originally posted by GoRacer
Which one did you choose? I can't tell by the picture you posted.
Which one did you choose? I can't tell by the picture you posted.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM



