Already searched, but... help with bov, pliz
 

Hi there! My HKS ssqv has just arrived (with the specific flange), but I have no idea
about installation. The problem is that it's supposed to be placed instead of the
stock one, in the same place, the nearest to the stock box. But I see this:

http://img206.imageshack.us/img206/3...n014ps5.th.jpg

The stock one has two connections to 2 hoses (in&out), while the HKS has only one
hose to connect, as you can see. So how is it possible that this has to be placed
there? This is the where the stock one is located:

http://img204.imageshack.us/img204/8...014bdg7.th.jpg

Am I missing some piece? Any help? I want to hear it blowing :-)!!!!

looks like you are missing a mounting bracket, you connect the hose from the y-pipe to the new bov then you cap the hose going to the air box or remove hose and cap at the box, you just need to make a bracket to mount the bov where you like it.

the stock bov has 2 connections because in its stock form it vents to another hose which connects to the air box. with the hks bov attach the hose the is coming off the side of the y pipe to the pipe on the hks flange, hook up your vaccuum line that comes from the UIM to the hks bov and find a place to put it where there is room. your not missing anything.

^
sure.

Already done. Nice psssssssssh!!! Thanks :-)

no problem.