RX7Club.com - Mazda RX7 Forum - aftermarket oil pressure gauge

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - aftermarket oil pressure gauge (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/aftermarket-oil-pressure-gauge-707219/)

AWD-RWD racer

11-24-07 02:49 AM

aftermarket oil pressure gauge

anywhere else to get oil pressure from besides the oil filter neck?

G's 3rd Gen

11-24-07 06:15 AM

Not w/ out any major work. Get the filter pedastel from RE speed. The new version is nice. Been using it for 2 years. I run my oil pressure and oil temp guages there. A bit tricky to install w/ motor in the the car but I did it. Just have to patient w/ threading the nut on the bottom side. Get someone w/ small hands to start the thread for you. G

AWD-RWD racer

11-24-07 06:24 PM

anyone else? dont really feel like spending 80 bucks to hook this gauge up.

CMonakar

11-24-07 06:48 PM

You might consider trying to connect the new sensor to the stock port in addition to the stock sensor using a T fitting, or you could mount it remotely as I have using a -3AN line. The fitting size for the block is 1/8 BSPT.

Six Rotors

11-24-07 06:51 PM

Install a 'T' at the stock oil pressure location.

AWD-RWD racer

11-24-07 11:52 PM

what do you mean....?

Quote:

Originally Posted by CMonakar (Post 7546225)

you could mount it remotely as I have using a -3AN line. The fitting size for the block is 1/8 BSPT.

All times are GMT -5. The time now is 09:27 PM.