ABS problem solved
 

If any of you guys run into weird ABS problems with the light staying on all the time, my little discovery today might help.

http://www.ilostmymind.com/upload/jonabs_connector.jpg

That's cute isn't it? Somehow I got moisture in there I guess and it cause the corrosion which ate away that 12v power pin in the connector for part of the ABS. After finding this I pulled both offending pins out of their respective connectors and routed them external to it, and viola! ABS works like a champ again. Just FYI for all you rotorheads out there, I guess these cars are getting old :) Oh well, one electrical gremlim down, now on to my hot start and weak ignition ones.

is their anyway of putting abs on say a switch if so how???

not so much abs but more traction control...

Yes, there are a bunch of was, just check out the FSM (factory service manual) wiring diagrams and you'll see.

Don't know what you are talking about traction control, don't have that on my car.

i dont have service manual :(!!! :( :(