Able To Get Readings On Tps, But How To Adjust It
 

hey guys i was on the Lighting rx7 site and i came aross the TPS adjustment page. I followed that, got a reading of 1.24 for the 2nd wire from the top. the specs say .75 to 1.25. My idle was around 2000, now its around 1200,
can anyone help and tell me. Am i suppose to turn the TPS clockwise or counter clockwise, to make the reading go up ro down? i put the black TPS part on and turned it around until the connection was facing normal, i dont know if i have to turn it again to get it tighter, so anyone please help thanks.

Just pull it back and forth. There are 2 small 7 mm srews that hold it in. Lossen the bottom one up and just barely lossen the top and adjust away.

Heres a link that my help
https://www.rx7club.com/showthread.p...&highlight=tps