99 spec Adding greddy fmic?
 

I am looking at getting a greddy 2row fmic (front mount intercooler) and i am undergoing a 99 spec front bumper conversion and was wondering what all would have to be done to get it to fit. Such as ac removal and radiator mods what all needs to be done to be able to fit it properly. thanks

try the search button, im sure this has been posted before

I have a new mazda 99 spec bumper on my project car and I also have a greddy fmic. After looking at the amount of hacking that would need to be done to the bumper I've decided to replace the IC with one that fits behind the frame support.

i've ran the 2row on a stock bumper that i had to cut. If i had to do it over i would have gone another route

i have the 99 spec bumper and wanted to go with the greddy too but you have to cut the shit out of the bumper.. i went with the blitz intercooler that sits behine the frame

look:
http://www.goldenautomart.com/DCP01788.JPG

sorry, i dont have a smaller pic

With the greddy 2row and a 99 spec you will have to cut, but not as much as you have to cut off of the the 93 bumper.You could also go with the apexi fmic and you will not have to cut.

Thanks for all the help i think i am going to go with the apexi fmic because i don't feel like cutting up a new bumper thanks again