94 vr project
got some pics gonna pick it up this week will keep updated and if any one has a cluster please let me know well here are the pics needs a lot of tlc but will be a stright up killer when done
http://i19.tinypic.com/2w5vevm.jpg http://i16.tinypic.com/3y3n4a8.jpg http://i12.tinypic.com/2cr1tl1.jpg http://i12.tinypic.com/40fxl6w.jpg |
Pics really need a resize, but it looks like you have a nice big project ahead of you. Best of luck!!
|
thanks also how do you resize pics i dont know how
|
Ouch, that looks like a hard hit.
|
yea but its in the right place where it dosent affect how the car drive stright i hope but it should be an easy fix the frame guy said hope so i cant wait for that T51R to spool haha
|
i need to know i was going to get a cluster from the mazda dealer and they said there is 2 types one for stiff suspension and one for normal what does it have to do with anything
|
Yours has the rear wiper. That would make it a 'normal suspension'. 'stiff suspension' would be an R2.
Dave |
thanks a lot but just my luck their out of those clusters
|
get out the check book
and check your balance first |
If you are going to use a dealer, I would advise you contact Ray at Malloy Mazda 888-533-3400. Ray is a big supporter of the rotary community and offers great prices, low priced shipping, and your stuff will arrive very quickly.
|
Originally Posted by caredden
If you are going to use a dealer, I would advise you contact Ray at Malloy Mazda 888-533-3400. Ray is a big supporter of the rotary community and offers great prices, low priced shipping, and your stuff will arrive very quickly.
Yup. What he said. Lots of used parts here on the forum too. Looks like you're going to need some. actally make that alot. :) Good luck. |
thanks all ill give him a call any suggestions on what i should do to the motor im thinking streetport 3mm seals and hks t51r let me know what you think
|
Your going for big power huh, good luck on the project. Cant wait to see it finished!
|
yep and i cant wait eaither. well here is an interior shot needs a very good scrubbing but when done all the plastic pices are in side so should be easy to bring back to great also can some one tell me how to resize pics
http://i13.tinypic.com/2jblic5.jpg |
up its at the shop right now gonna go later and take pics of it on the lift
|
hey forgot to mention that it does have a clean title i was so suprised to see that also i got it for 400 cant beat that for a fd haha :bigok: :asian:
|
Clean title? You gotta be shitting me. You definitely cannot trust Carfax these days.
That looks to be a HELL of a project. That's some serious frame damage, and half the interior looks molded out. I would make real good friends with Fritz Flynn on this forum, as well as Ray Crowe from Malloy Mazda. |
i know i couldent believe it had a clean title but i saw it and its not as bad as the picture makes it look
|
It has a clean title because it avoided being appraised and evaluated. That's definitely a totaled car that would get a salvage title if an adjuster looked at it.
|
well that hasent happend so its pretty sweet well ill post more pics later in the week
|
good luck...you got your hands full
brad |
its good to see another one thats not goin to the junk yard :)
good luck |
dgeesaman,
I have a VR (93 base) with no wiper and it's not a stiff suspension (R1) so I don't know that this is a definitive single indicator of R1 or non-R1 (or R2 if isn't not a 1993 car). Mike |
It looks like a 93, not a 94. It doesn't have a pass side airbag, all 94's and 95's have a pass side airbag.
|
I just looked again. It's definitely a 93. I can tell by the missing airbag as rx7weee pointed out, as well as the spacing of the thermostat of the A/C, as well as the tan door panels.
|
All times are GMT -5. The time now is 11:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands