Under PSI

Ok, we are borderline right now with the group buy. For those of you that have been hiding under rocks, or rubbing stick together to see your monitor here's the short of it:

We are in the process of bringing over a limited number of East Bear Headlight kits for FD RX-7's to whoever gets in on this group buy. Right now we are going with the price of $580 PER SET, which already includes shipping. I am going to set a deadline soon, but haven't decided as far as when, but watch this thread, or contact me for updates.

Here are pics of the lights installed and a link to what they consist of.




^^^DRAGON'S CAR^^^


^^^DRAGON'S CAR^^^

For a pic of them uninstalled (what you will recieve) go here: http://www.east-bear.co.jp/aeroparts...s/h-light.html

As far as payment goes, I *prefer* PayPal, because A) It is Fast and B) It Allows for Credit Card Payments. I will accept MO payments, but you will have to contact me ASAP because of time issues.

Shipping should start in roughly 2 weeks, and I although I am not guaranteing any definite times of arrival, they should reach your door around the 2nd week of August.

Questions? Contact me.

Under PSI

Ok, we are borderline right now with the group buy. For those of you that have been hiding under rocks, or rubbing stick together to see your monitor here's the short of it:

We are in the process of bringing over a limited number of East Bear Headlight kits for FD RX-7's to whoever gets in on this group buy. Right now we are going with the price of $580 PER SET, which already includes shipping. I am going to set a deadline soon, but haven't decided as far as when, but watch this thread, or contact me for updates.

Here are pics of the lights installed and a link to what they consist of.




^^^DRAGON'S CAR^^^


^^^DRAGON'S CAR^^^

For a pic of them uninstalled (what you will recieve) go here: http://www.east-bear.co.jp/aeroparts...s/h-light.html

As far as payment goes, I *prefer* PayPal, because A) It is Fast and B) It Allows for Credit Card Payments. I will accept MO payments, but you will have to contact me ASAP because of time issues.

Shipping should start in roughly 2 weeks, and I although I am not guaranteing any definite times of arrival, they should reach your door around the 2nd week of August.

Questions? Contact me.

alwan16

what kind of wiring does the kit come with to make it work with our existing stuff? do we have to do anything custom or will it all plug in and work?

Under PSI

Honestlly, all I know is what I see in the picture found on this page: http://www.east-bear.co.jp/aeroparts...s/h-light.html

In either case, I imagine it can't be *that* hard to wire into your existing wires.

Sorry I don't have more info.

kroams

Do you think it would be possible to use something like the Philips or another company's HID lights? Does anyone know if the pattern is good for the East Bear?

Alpine

bump

7-UP

under PSI,

When is the deadline? I want in but I'm still waiting on $$$ from home refinance.

JeffShoots

I'm in @ 580.00 and can PayPal.

jeffshoots@hotmail.com

Later, Jeff

MrFreeze

Any one have a picture of the kit on lets say a black car =)

bploz RX7

if everything is still a go just e-mail me at bplo@bellsouth.net so I can get you the money... thanks again

jimlab

The pod is higher quality than the Amemiya version, in that it allows the lights to sit higher (from appearances), and not cut off part of the beam. It appears to use the same lights as the Amemiya kit, which would mean that the bulbs are of type H3. I don't believe there is a direct conversion HID kit available for H3 bulbs, but I'm looking into it.

After owning the Amemiya kit, which requires cutting of the sheet metal around the light area, and the C-West kit which doesn't, I decided I wanted a light kit without a cover to avoid the scratching and discoloring concerns, as well as the risk of breakage, and the problems with fogging. The C-West kit probably has better lighting capacity than the Amemiya kit, but they're CATZ driving lights, so no upgrade is possible without full replacement. They also "bulge" to some degree, and the mismatched lights didn't look good to me.

Not entirely sure that I won't put a cover on the East Bear kit, but the options and lighting that it allows should be superior to the other two kits, and the price is just a bit over 1/3 of the RE Amemiya kit, and about 1/2 of the C-West kit.

OneBadRx7

For $580 shipped I would be in, how do we take care of payment?

Under PSI

Check your mail.

Under PSI

Well, response since this last advertizing barge has been very good, and it looks like the order is going to happen mid-next week.

I am closing down this group buy at: MIDNIGHT JULY 30TH.

If I don't have payment by then, I'm sorry, but it really isn't fair to those that got on it and send payments to me.

IF however, you are still intersted, you can send an E-mail.

Jason

iTrader: (5)

Matt,
Once orders are placed how long would it take to get these kits?

Thanks
Jason

MPython

iTrader: (1)

That site is almost completely in Japanese. Did you find any text that was readable to find out more?

What I really want to know is, is there some kind of clear plastic cover (or plexiglass or Lexan or whatever) over the lights to protect them (and look cooler)? Or are they exposed?

Thanks,
Jeff

Otay

iTrader: (13)

Not to throw a wrench in the works or anything but how about the FC lights as well?

http://www.east-bear.co.jp/frame/f_aero_index.html

I'm in for both depending on the time frame of the buy. And of course the cost. Keep us posted.

Alpine

they don't have a cover

Under PSI

I am working with the timeline of 2 weeks untill they reach the US, and then another 3-7 days to be distributed across the country. I figure if the money is wired by the 1st of August, they should get to me by the 14th-15th of August, then be delivered to everyone by 22nd-23rd.

This is all tenative, but I just like having a traget to shoot for.

Under PSI

Lets try keeping up with this buy in the 3rd Gen Specific Section.

https://www.rx7club.com/vforums/show...threadid=10646

It'll just be easier to keep all the questions and answers together, and many questions have already been answered there.

bploz RX7

bump... almost deadline time

bploz RX7

last bump

Under PSI

Thanks for the bumps...

We are at our goal right now for the lights. I just recieved an e-mail from East Bear and they are telling me shippng can start at the end of the week (good) and that it should only take 1 week instead of my estimate of 2 (also good). However, I want to keep the timeframe the same as I have just so people don't get too anxious then let down (bad).

However, there IS still room and time for people to get in on this! However, it IS limited. Contact me via e-mail or AIM and I will let you know the details. Please only inquire if you are SERIOUS!

Thanks to everyone that is involved in this!

bploz RX7

what is everyone going to do w/ the button to pop-up the headlights now there is no use for it??

badass7

Hey, with all you guys going with this Headlight conversion...THERE SHOULD BE one of you looking to part out your OEM headlight assembly. To those of you who may be interested, I am in need of a Brilliant Black Passenger side Headlight Cover. Please email me at talvendi@cs.com Thank you