3.75 v band for greddy turbo kit
 

whats up guys im looking for v bands for my greddy t88 turbo kit. i cant seem to find the 3.75 anywhere. does anybody know where i can get or what i can do about this?

Napa

Is that the outer diameter measurement? Vibrant's 3.5" vband is good up to over 4" outer diameter. if you need larger, go with their 4". You can't buy from their website, but if you search the part numbers, many people have them in stock (amazon typically sells them).

Vibrant Performance ::.

Thats is the inner piper diameter.

Have a machinist make the flange, it's pretty simple and will probably cost less than finding a greddy one. For the clamp I'm not sure which exact size you will need but it will probably look like this: Turbine Clamp 115.5 mm Mitsubishi TD08 TRUSTY T88 T88H | eBay

If you get lucky, you can find the 115.5mm and 99.1mm clamps holding together old junk mitsu CHRAs and might be able to get one for next to nothing.

I have the flange I just need the v band clamp. Im going to measure the outer diameter when I get home.