Picture of Cs Shifter?
Anyone have a picture of the full short shifter?
Is this still considered the top short throw shifter out there? |
Here you go: C?s Short Shifter | Grand Mighty
|
1 Attachment(s)
|
1 Attachment(s)
|
What other short shifters are as good quality.
|
I heard the B&M replicas are decent for the $. I really wish I had bought a C's years ago, debating if I should hold out till I can find one or just break down and try the B&M replica.
|
I believe the Mazdatrix short shifter is based off the C's design. See their site for more info or give them a call.
|
Mazdatrix ss no longer available. Might be able to find a used one but their site is a no go :/
|
Do we have any donors and machinists willing to make a copy for a group buy? I'd bet there would be a few people interested. I'd be willing to try to put it together if necessary, but I would need to borrow someone's shifter.
|
I'm pretty certain Chris at Rotary Performance is looking into making these, I gave him the idea ;)
I also had contacted Mazdatrix but they told me they'd need to make at least 100 in order to retool. |
I may have one for sale in there future hah.
-I've had the stock, B&M and C's. C's is by far the best one, the throw is short and precise and not as notchy as the B&M. :D |
I have a NIB C's shifter I've been saving for my resto. If someone reputable wanted to do a GB, I would be willing to loan mine for pattern making.
Some time back I created a drawing of the nylon bushing for ZE Power MX6 cause the one he bought did not have it. |
I have a shifter that looks identical to the one in the pic above that I am not using which is in excellent condition.will sell if any one is interested
|
Originally Posted by GoodfellaFD3S
(Post 11985608)
I'm pretty certain Chris at Rotary Performance is looking into making these, I gave him the idea ;)
I also had contacted Mazdatrix but they told me they'd need to make at least 100 in order to retool. |
I've had a C's shifter for years and the groove is beat to shit and makes shifting sloppy. I was thinking about getting the slot machined so a groove bushing can be put in there similar to the Mazdaspeed, Mazdatrix and stock shifters. But if there are replicas being made maybe I'll just wait. Is the replica going to use a bushing or just a solid groove?
|
All times are GMT -5. The time now is 08:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands