Cant call it ricey when its being used at the track! Love your wheel setup BTW.

More pics pls

4 years ago and today. A lot has changed including the garage lol.


Attachment 639398

http://i17.photobucket.com/albums/b8...psvnibnnue.jpg

Attachment 639396

Attachment 639397

Sorry... double post

Angeles Crest hwy.

Attachment 639295

Attachment 639296
http://i17.photobucket.com/albums/b8...ps8151cf6a.jpg
Attachment 639297
Attachment 639298

https://lh6.googleusercontent.com/jO...q=w778-h518-no

https://lh3.googleusercontent.com/-k...18-no/rear.jpg

Here is my work in progress. She goes for paint in the next couple of months.

I'm sure this will cause plenty of opinions ;)

USA <----> JPN


Attachment 639205

@gmonsen nothing too crazy lately sans-being rhd and new motor is in :) most of the pics I have right now are the car in various states of disarray haha

here's a pic of her on the trailer~

Attachment 639203

Some FEED side steps would really set this off!

Drift it for sure haha, suspension geometry has been reworked and everything.

Attachment 639111


Tails came off to build these:
Attachment 639112

Engine bay done in floral:

Attachment 639113

And a grainy night shot of the motor~

Attachment 639114

Been a while since I posted .. fd is at the fabricators getting new down pipe and other stuff done then tune.


https://scontent-a.xx.fbcdn.net/hpho...43298066_n.jpg

https://scontent-a.xx.fbcdn.net/hpho...10&oe=5469AC9F
https://scontent-b.xx.fbcdn.net/hpho...8a&oe=546B796F
https://scontent-b.xx.fbcdn.net/hpho...cc&oe=5470B8EE

https://scontent-a.xx.fbcdn.net/hpho...bf&oe=545BC76A

Are you placing the bumper in on these pics or is the car really just that low...reason i asked is because the bumper to fender lineup looks like the bumper was put there for the shots. but anyway those welds are seamless, got yourself a good fabricator:icon_tup:

And a shot front this past weekend's shoot.

Attachment 639044

A few of mine, haven't posted for a while.

Ive driven it like that. But the fabricator is making a bash bar to hold my bumper in place.. and yes its really that low:icon_tup:
https://scontent-a.xx.fbcdn.net/hpho...81348691_n.jpg

https://scontent-a.xx.fbcdn.net/hpho...78847009_n.jpg

https://scontent-a.xx.fbcdn.net/hpho...df&oe=5468BD8D
https://scontent-b.xx.fbcdn.net/hpho...26633554_n.jpg

Battle Cat I was ogling your welders instagram photos the other day. His description of the work he did on your turbo is intensive!
Obligatory photo of car in progress.
Attachment 639012

Duck, what are your wheel/tire specs?

Sorry it took me a little while to respond. Im running Fikse Profil 13 Wheel size is 17"/8.5" and 38mm offset up front 17"/9.5" 38mm rear. Tires are Nitto NT555 255/40/17 and 285/40/17. If you want to go really low you may have to roll the rear a bit or run a 275 Otherwise its pretty flush. I have mine rolled to go a bit lower yet.

Specs on this setup?? Your car looks super clean

Attachment 638811
Attachment 638812

Attachment 638813

No Voltex wing on...
https://www.rx7club.com/attachment.p...0&d=1409722744
https://www.rx7club.com/attachment.p...3&d=1409722973

Thanks, I appreciate it. And the set up is pretty modest fitment wise he cars just pretty low at the time but its 18x8.5 +20 all around with a 5mm up front and tires are 235/40/18 and 255/35/18. Front deff still has about another 10mm if you were really looking to make it really flush but the rear is just about right but could probably use a 5mm or so. And I'm on unknown camber whatever it is I got from the drop.

As per rules.
Attachment 638799

front bumper
 

Drops42 I had a small question, I know the front bumper is a 99 spec, but did you put some rods in to open up a little more the main opening (the middle one) of the bumper?

thanks