When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi finalizing my build and i am confused on where these last 2 cables go. One is a loose wire and appears to be maybe a ground and the other comes from the harness.
I also accidentally had them connected to my positive terminal (opposite side of the 2 hole plate) and blew my 120amp fuse. Any suggestions on what else i should inspect as a result of my incompetence.
I think those lugs should be attached to the two bolts on your fusebox, you can see the bolts on the left side of your photo. Is that what you said you tried and blew the fuse? I tracked mine down, and it really does look like that should be it...
I think those lugs should be attached to the two bolts on your fusebox, you can see the bolts on the left side of your photo. Is that what you said you tried and blew the fuse? I tracked mine down, and it really does look like that should be it...
(lugs secured by fusebox bolts)
durr i had the opposite end not in the egi fuse box but sitting on the body! Thanks haha
12-18-18, 07:12 PM
