99 Spec Front Bumper Plate
Ordered an OEM 99 Spec front bumper from Japan this week :icon_tup:. How do I go about getting a legal (or legal looking) USDM front plate in JDM size??
Another option I'm looking at because I feel option 1 is unlikely, is to run a front vanity plate like shown below. Anyone have any insight on this one? http://i1259.photobucket.com/albums/...psolsmhlz0.jpg http://i1259.photobucket.com/albums/...ps1h89a6sc.jpg |
I have seen the RX-7 ones on ebay.
|
I cant seem to find them anywhere. Its become a real annoyance haha.
Can anyone provide a link? I found a few old threads on them and old postings on Etsy but nothing currently for sale. |
|
Only place currently making them is LRB Speed
|
Originally Posted by H_M
(Post 12215421)
Japanese plates:
JDM japanese license plate mazda rx7 fd fc 13b JZA70 EF | eBay JDM japanese license plate mazda rx7 fd fc 13b JZA70 EF | eBay Although these will fit, they are not what I am looking for... If possible I want an OH plate matching my existing plate numbers in JDM plate size (Custom made). After looking I don't think this is a possibility. Option 2 is the half vanity plate shown in the photos with some sort of Mazda logo. Thanks for the help |
Originally Posted by Mikelivi91
(Post 12215442)
Although these will fit, they are not what I am looking for...
If possible I want an OH plate matching my existing plate numbers in JDM plate size (Custom made). After looking I don't think this is a possibility. Option 2 is the half vanity plate shown in the photos with some sort of Mazda logo. Thanks for the help |
Originally Posted by THE TECH
(Post 12215443)
Oh, you want a state plate made in another size. Unfortunately, that's quite illegal. Might be very hard to get something like that done.
Thanks TECH |
Originally Posted by Mikelivi91
(Post 12215446)
That's what I've been told. Even as much as drilling out new holes is illegal... But what makes a vanity plate like RX-7 or Mazda legal and not one that mimics the OH plate with matching letters and numbers to my existing? Aren't they both essentially art work on a placard?
Thanks TECH |
Originally Posted by THE TECH
(Post 12215447)
One isn't trying to represent a state issued license plate. The other is just a statement of what car it is. Quite a huge difference.
See this is where it throws me for a loop then... The site below sells custom aluminum plates that "mimic" a state issued license plate. Although its not made in the size I need its still legal and can be made to order. :scratch::scratch::scratch: California Replica State License Plate for Bikes, Bicycles, ATVs, Cart, Walkers, Motorcycles, Wagons and Vehicles |
I cut a piece of aluminum to fit the 99-spec space, then drilled and taped holes to accommodate the state license plate. It wasn't that hard, but there may be off-the-shelf solutions out there
https://cimg3.ibsrv.net/gimg/www.rx7...b118365472.jpg |
Anyway, LRB Speed does have the 99 Spec plates at only $35 and look great! Ordered me 2 sets.
Kudos TECH for the find! For anyone else looking for the half plates, link below 99 Spec RX-7 License Plate |
Originally Posted by TomU
(Post 12215467)
I cut a piece of aluminum to fit the 99-spec space, then drilled and taped holes to accommodate the state license plate. It wasn't that hard, but there may be off-the-shelf solutions out there
Tom that's an idea right there. Do you have any pictures with the plates on? Really curious as to how it looks |
|
Man Tom that looks perfect! For some reason I figured the US plate was much smaller... It looks like only a little bit of the backing aluminum is showing in the picture.
Im going to try both options, one with the RX-7 half plates as well as one with the actual OH license plate. Should have some pictures up soon |
I cut the aluminum to the size of the US plate. Think it's pretty close to the size of a Japanese plate, but the holes are different. You could probably go with just a strip of metal to attach a US plate to, but I wanted a little rigidity below where the bumper ends and the plate overhangs into the mouth of the radiator intake.
If you are not required to have a front plate, I would just go with an RX-7 plate if you can find one, or a used Japanese one |
Front plate law in OH and the reason I was trying to get a JDM sized OH plate which sounds ridiculous hahah. But after seeing yours and how well the US plate fits I have no more worries. Very simple fix
|
I am making some but I am not yet a vendor for rx7club.com, so please pm me if you are interested in some details.
Tim |
Will you make some that's not carbonfiber?just plain black and white letters
|
Originally Posted by kensin
(Post 12216603)
Will you make some that's not carbonfiber?just plain black and white letters
|
Originally Posted by Mikelivi91
(Post 12215453)
See this is where it throws me for a loop then... The site below sells custom aluminum plates that "mimic" a state issued license plate. Although its not made in the size I need its still legal and can be made to order. :scratch::scratch::scratch:
California Replica State License Plate for Bikes, Bicycles, ATVs, Cart, Walkers, Motorcycles, Wagons and Vehicles "Please Note: These plates are novelty vanity plates. These plates are not officially issued registration plates issued by your State government and are not intended to replace the official registrations plates on your motor vehicle." |
I noticed that also after I posted... After seeing what others have done, and seeing how close the US plate is to the JDM, im going with Toms route using a backer plate to secure the US plate on the bumper. Its a lot tighter fitting than I imagined.
Also plan to run some RX7 vanity plates at the track or at shows. But good news, the bumper came in yesterday so ill be trying some variety of plates on this week http://i1259.photobucket.com/albums/...psb2wrgsdk.jpg http://i1259.photobucket.com/albums/...psse4ipmip.jpg |
Originally Posted by Mikelivi91
(Post 12216661)
I noticed that also after I posted... After seeing what others have done, and seeing how close the US plate is to the JDM, im going with Toms route using a backer plate to secure the US plate on the bumper. Its a lot tighter fitting than I imagined.
Also plan to run some RX7 vanity plates at the track or at shows. But good news, the bumper came in yesterday so ill be trying some variety of plates on this week That bumper looks mint man...and our cars are going to be twins with rpf1 and 99 spec haha |
Originally Posted by mkiv98
(Post 12216939)
What do you mean by tighter fitting? It's too thick?
Originally Posted by mkiv98
(Post 12216939)
That bumper looks mint man...and our cars are going to be twins with rpf1 and 99 spec haha
|
Really love how these bumpers fit on the car. Granted mine is just hanging there but really sets the car off. Plate pics to follow tonight or tomorrow...
http://i1259.photobucket.com/albums/...ps0q24idgv.jpg |
All times are GMT -5. The time now is 12:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands