My Hyper Ground System Install with picture.
 

After my post of winter mods I got a lot of questions about how I did my ground setup, so here it is.
Keep in mind this is my personal setup and there may be better (or worse) ways to do it.... so copy at your own risk :-)

http://www.myrx7.com/images/damians_ground_points.jpg

I also suggest adding an extra ECU ground.

Great pic, that will help others alot I'm sure. Quick question then, any noticable difference? Not in butt dyno HP but in smoothness or drivability?

Tim

nice job.

sweet. i started installing mine last week and only got 2 in. this will help out alot. nice work and thanks for sharing.

i just saw you are in MN too, you should come to St. Cloud and do the rest of mine.:D

Very informative, thanks for the pics!

ur welcome redhot and astro, glad I could help.

Yes these are great help! Thank you damian.

Thanks for both this pic and the pics in the other thread. Given me lots of ideas, and a new list of things to work on. :)

did you make the wires yourself or did you get a kit?

ur welcome guys, glad i could help...

apexkw, it is a kit, you can get it here: http://66.216.67.51/product.asp?0=209&1=348&3=650

Member of the month! :D

his website is looking bad-ass too!...

I am in Saudi right now and I guess I have been missing out on all the talk about this hyper ground system. So if I could just ask a couple of questions about it. I went to the link that told me about it and gave the dyno comparison but has any one else done a dyno test that can confirm that you will see results, and what if you have your battery relocated to the back in the storage bin behind the driver seat will the grounding lines reach. And for the last question how long does it take to install? Thanks for the help.

damn damian...

are you a graphic design artist?!?!?

Very nice pics and write ups...nice website intro too :D

yes i am actually :-) I do multimedia and programming
thanks for teh compliments fellas!!!


as far as dynoed results on the HGS, I did to many other things to tell what kind of difference it specificaly made

yeah dude that webpage is so bad ass, i couldn't help but start dancing :boink: good shit :bigthumb:

thanks bro :-)

I know this is mega old but figured I'd dig it up...Great thread and also I wanted to see if anyone had anymore input on the points damian used.

...i had to print my own diagram recently to install gorudn wires on my track car :-)

Question for you Damian, how does the insulation on the hyper ground wires for the downpipe and cat stand up to the heat from the exhaust? In one of your earlier threads you showed how you used coaxial cable wrapped around the OEM ground for the cat/muffler. Do you think the hyper ground wires make a better ground wire then the coaxial/OEM combination?

Also thank you for the great threads you have made. Full of useful info and great images, keep them coming.

>>Question for you Damian, how does the insulation on the hyper ground wires for the downpipe and cat stand up to the heat from the exhaust? In one of your earlier threads you showed how you used coaxial cable wrapped around the OEM ground for the cat/muffler. Do you think the hyper ground wires make a better ground wire then the coaxial/OEM combination?

the hypergournd is much better than the coax crap i tired (heheh) and as long as you look the wire a away from directly touchign the pipes, it holds up fine to the heat. the ends get a little melted, but no bigie.

>>Also thank you for the great threads you have made. Full of useful info and great images, keep them coming.

thanks!!! :-)

Thanks Damian, hyper ground wires or equivalent it will be. All I have to do now is wait for the snow to melt and summer to arrive.

hehe, yup, im waiting for the warm weather to come back too :-)

A little off the subject but - Damian, I saved your site on my favorites, I was showing the vids to a bunch of people at work.
They loved the race stuff, but the most laughs came from the light saber stuff... :bigthumb:

:-)