RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Gen Archives (https://www.rx7club.com/3rd-gen-archives-73/)
-   -   Downpipes (https://www.rx7club.com/3rd-gen-archives-73/downpipes-4594/)

RussellTT94 05-08-01 05:39 PM

Downpipes
 
Alright,
I got my RX7 in November and finally put a boost gauge in it this past weekend. I figure my next step should be a downpipe. Does anybody have any suggestions as to which one to get? Or any ideas for other mods I could do without running too lean? I appreciate any responses.

Thanks - Russell

Rated R1 05-08-01 07:41 PM

Hey Russell. Welcome to the board. Basically almost all downpipes are about the same. Just be sure to get a SS tainless one though. Look out for a group buy on downpipes in the group buy section. If your last name is Jeffcoat PM me because I used to go to school in Columbia with a Russell Jeffcoat.

evot23 05-08-01 08:38 PM

downpipes are basically all the same performance wise but some differ in ease of installation.

Get the catback next then air intake then ecu then boost controller...etc.

------------------
Eddie
evot23@msn.com
Founder Gen 3 RX7 Club on Yahoo!
93 R1
JDM 99 spec taillights
C-West headlights
Greddy Profec B
M2 ECU and CF Intake
Apexi N1 Dual
N-tech DP

dis1 05-08-01 11:10 PM

A down pipe is a good idea. Take a look at my web site. It should be of great help to you.

------------------
CVS
Silver Bullet Rx-7
http://tiger.towson.edu/~csaftn1

Tobal 05-09-01 04:58 AM

Hows the HKS DP? any feedback?

Rotary93 05-09-01 05:54 AM

Im running the HKS downpipe...Ceramic Coated...for 199 from Jason. Lots of performance gains.

Cant beat the price. I cant see spending $325 for SS that you will never see under the car. Take the extra money and buy an AST.




------------------
Anthony 93 R1
KD/Malloy Reman Motor
M2 Intake
HKS Downpipe
Rx7 Fahion Midpipe
Custom Catback
Apexi Power FC
ACT Street/Strip Clutch
Hose Techniques vac hoses
Pettit Trak-Pro Springs
Brembo Cross Drilled/Slotted Rotors
Hawk HPS Pads
and other goodies....

whitekingsnake 08-03-01 05:09 PM

rotary93,

Do you notice any difference in the sound(good or bad) with the HKS. I heard the ss sound different....because the mild steel sounds mettalic.


Later,

G 's 3rd gen 08-04-01 11:37 PM

I have the ss down from pettit($299). Sounds a little more snorty but not much. Definately the next thing you should do.Sometimes it is a bitch grtting your old bolts loose though..Good luck....


All times are GMT -5. The time now is 03:49 PM.


© 2024 MH Sub I, LLC dba Internet Brands