RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Wtf is BNR's website now? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/wtf-bnrs-website-now-185284/)

dr0x 05-11-03 02:13 AM

Wtf is BNR's website now?
 
The page I had book marked is a 404 error now?

mazdamanda 05-11-03 02:42 AM

http://www.bnrsupercars.com/

https://www.rx7club.com/forum/showth...ht=bnr+website

Rx7Nub 05-11-03 03:21 AM

Under construction... damnit, I wanted to check out the turbo upgrades... any other websites that will have them listed in good detail?

Ryde _Or_Die 05-11-03 09:22 AM

Well the site was old anyways. You should just email Bryan. I think it might be bnrsupercars@aol.com but I'm not positive.

yearrgh 05-11-03 11:29 AM

Thats what it is, and he will probably respond to any questions in a day or two, from my experience.

$150FC 05-11-03 12:15 PM

The site's down. A new one is being made. There isn't any place that lists BNR's FC upgrades.

The further away from the end of the month you email him, the better. That's all I'll say for now, but if you can get your email out today as opposed to the end of May, that would be better.

Victor

Bigretardhead 05-11-03 03:08 PM


There isn't any place that lists BNR's FC upgrades

http://66.216.67.51/subcatmfgprod.asp?0=220&1=364&2=-1

bl|nk 05-11-03 06:38 PM

to look at'm.. i'd go straight through Bryan though if you order just because Bryan communicates during the rebuild to give you status updates and what not. If you have a middle man you'll probably lose those every so nice updates ;)

BoostedRotors 05-11-03 06:51 PM

205.663.4RX7

SonicRaT 05-11-03 07:20 PM

His website offered a little more info on each stage though, which is what I'm looking for. I can't decide on stage 2 or stage 3...decisions decisions!

bl|nk 05-11-03 10:13 PM

where you going for the stage 2 with t04 compressor housing?

SonicRaT 05-11-03 10:27 PM

yep, the t04 stage2, or the 60-1 stage 3.

bl|nk 05-11-03 11:43 PM

it's the same price go for the stage 3 :) give me a few i'll see if i can dig through some email sfrom bryan and find more info for ya

bl|nk 05-11-03 11:46 PM

The stage 2 will have to have a 360 thrust bearing. The cost is $660. The stage 3 has to have a 360 thrust bearing also but the cost for it is $680. Let me know if you have any questions...

that's all I could find from my emails.. 'cept the fact the Stage 5 with a 62-1 wheel is 1050 :D


All times are GMT -5. The time now is 10:58 AM.


© 2024 MH Sub I, LLC dba Internet Brands