Wiring cas to ecu
 

can some one tell what pins the cas plugs into on a s5 n/a?Im thinking its 3e for the blue 3g for the white 3h for the red but im unsure about the green.

David

This is when you whip out the Factory Service Manual that you have downloaded, and go to the engine electrical section. There are full pinouts for the ECU.

-=Russ=-

Ok i took a look and found that the green wier needs to tie into the red on pin 3h. So far i have my dash harness,1a,1b,1c,1d,3e,3g,3h hooked up but still no spark.AM i missing anything? Also how dos the afm tie in to the ignition?