Will these rims fit my 1990 Fc3s Vert
 

Rims:
FRONT - 18"x9"; 5x114.3 bolt pattern; +45 offset
REAR - 18"x10"; 5x114.3 bolt pattern; +42 offset

Rather not make the same exact thread. Will these fit? They are the same exact bolt pattern, i plan to pick them up tomorrow.

Voxx Saga rims 5x114.3

FRONT 18"x8" +40mm offset or +38mm
REAR 19"x8" +40mm offset or +38mm

On replacement struts and stock springs.

Will these fit properly or will the offset look terrible??

you are going to look like a monster truck and 19's are way too big for a fc unless you have a kit and have some kind of lowering suspension.

so 18s are too big?

I'd be worried about the offset.
Check the wheels section though, or ReTed's chart on fc3spro.com

i tried to fit my 18x9 on the rear of my fc and i have new struts and springs. they didnt fit i need a roll and pull bad and it rubbed on something under th car . u may want spacers with those i think you will be fne. as foar as the 8inchers i would say they would fit just from my experiance but that is depending on certain variables as previously stated.

spacers 15mm atleast

9" wheels will not fit up front. They will stick out unless you have wider than stock fenders.

Here check this chart as Molotovman mentioned. http://www.fc3spro.com/TECH/MODS/RT/rims.htm

if your car is on stock suspension or similiar it will not look right.

18 are way to big bro you should go with some 17s or 16s i love how 16s sit 17s are ok
check out my pg and see if thats an idea how you would like your car to look

I got a kit and lowering springs on the front. I plan on buying a set of Tanabe springs.