Widest Rear Wheel Possible on 88?
 

Hey guys i was wondering what the widest wheel i could slam in the back could be.. Im open to using spacers. Hoping to get a lot more wet traction and reduce wheel hop in 1st. Also, anybody had experience with the hardened bushings in back?

Thanks Brothers

Let me rephrase that, Im hoping to eliminate wheel hop...

I don't believe that either wet traction or wheel hop are primarily addressed through tire width.
Traction is a matter of compound and tread design and I believe that wider tires tend to hydroplane more than skinnier ones.
Wheel hop is a function of suspension design and bushing material...again, wider tires only magnify the problem, not solve it.

Tire hop is a suspension issue....

Ive always thought that the wider the tire= more rubber connecting with the road which= more traction

yeah, but think about what wheel hop is. If your problem was just skinny tires you would just lose traction, the wheels would spin and there would be no wheel hop.

I bet your rear struts are shot.

That is generally true for dry conditions, not wet.

When water is involved, things become much more complicated.
How much standing water?
How long since the last rainfall (lots of oil and antifreeze floating on a newly wet surface that hasn't been washed clean in a while)?
What kind of pavement?

You seek a simple solution for a complicated problem.
Even in the dry a wider tire is not necessarily the best way to go.
Excluding single priority events- like drag racing, where the launch is pretty much the whole show- the desire for more traction has to be balanced against many other factors.
Remember, a wider tire and wheel weigh more than a narrower one, so loss of acceleration may outweigh the advantages gained with greater initial traction.
Wider tires also impact the drag coefficient of the vehicle (which is why uber mileage cars come with skinny tires).

Many performance cars were designed with some tire slip as part of the handling.
An excellent example of a car that could have used more slip is the early Porche 911.
It gripped tenaciously right up to the moment it lost it altogether- very little warning that you were approaching the edge, just ooops!I'm going backward! (this phenomenon was exacerbated by the extreme rear placement of the engine but the principle holds true in most cases).

So basically, "I'm gonna slam some wide wheels on my ride" is the PepBoys approach to improving your handling.
Probably look great at the root beer stand but could cause worse problems than you started with.

wheel hop is in part the result of lost traction, but as everyone has said, there are other things at work here. I never get wheelhop on my T2, just clean wheelspin. What really helps is replacing all the bushings and the springs/shocks. Other stiffening may help some as well (strut tower bar). My old 88 GTU had significant wheelhop due to trashed bushings, and replacing the springs and struts alone actually made it worse.

Check your differential bushings, as well as all your rear suspension. Putting in a different bushing material and/or checking/replacing your rear shocks may help do exactly what you want, without having to buy wide wheels. Plus, wider wheels weigh more, you can put a fairly large tire (255ish) on a 9" rear wheel, so do you really need to go wider?

That's awesome.

Gotta be a solid rear/tubbed?

im gonna have to guess that S4 is tubbed... but I think it wins

yeah, its definitely tubbed out

https://img.photobucket.com/albums/v...7/IMG_0040.jpg
https://img.photobucket.com/albums/v...7/IMG_0013.jpg
https://img.photobucket.com/albums/v...7/IMG_0009.jpg

do you have a build thread on that rx7? that thing is a beast!

its not my car. it was for sale a few months ago...i dunno if it still is.

In a straight line, yes.
In a corner, no.

The V8 guys install a 'Pinion snubber" that basically stops the diff from moving forward and greatly helps wheel hop...

widest rear tires ?
315 / 335 with wide fenders

although thats not gonna fix ur problem