Who Knows Injectors??
 

i have 2 injectors i got with a FMIC kit and i dont know what size they are.. i have a feeling one is a 680cc and the other is a 720cc but i havent seen one to know one.. so if you have or had a set of these could you tell me what size cc they might be..
the numbers on the teal one =195500-0830
the number on the purple one is =195500-1370
thanks.

Teal 195500-0830 = 690CC 1.8ohm
Purple 195500-1370 = 550CC 12.5 ohm

The -1370 is a 550 for a turbo. If the key is centered on it its for a low impedence car like a early half of 1987. If the key is offset it's high impedence for a newer than 1987 1/2 car.

Here: http://www.stealth316.com/2-fi_pics.htm or in other words I know not about -0830 so I did a SEARCH and put in the number 195500-0830 and copy catted the above thread. Whether he's right or wrong ...............

Hm, conflicting info. My book says that the -830 is 690CC, that page says 720CC.

http://www.witchhunter.com/injectordata1.htm when in doubt, overwhelm 'em in threads to look at. (humor)


http://www.witchhunter.com/FlowDataPix/d1955000830.jpg

So listen to CAKE http://www.witchhunter.com/FlowDataPix/d1955000830.jpg

sorry for hi-jacking your thread but what is the purpouse of having injectors in your piping on a fmic?

well one way its to send them to be cleaned and flow tested. don't use these injectors until they have been professionally cleaned. Cruzin does a great job for cheap