where can i get a 54 mm socket???
i've tried Autozone O'reilys and homedepot. they only carry up to 34 mm.
|
SEARS
Craftsman 2-1/8 in. Socket, 12 pt. # 00947789000 $22.99 |
Sears, NAPA is where i got mine, Granger
-Jacob |
sweet dude, thanx.
do you know what size drive it is? |
mine is an 1" drive i belive
iirc the socket cost me like $28, expensive i know, but it will never break -jacob |
sears guaranteed for life.
|
someone is gonna be taking a flywheel nut off:D
on a side note where can i buy a replacement flywheel nut? |
http://www.sears.com/sr/javasr/produ...id=00947789000
its a 3/4 inch drive btw. http://content.sears.com/data/produc...782000-dlv.jpg |
Originally posted by razorback someone is gonna be taking a flywheel nut off:D on a side note where can i buy a replacement flywheel nut? http://mazdatrix.com/B5.HTM -Jacob |
Air tools ownz you.
|
thanks crackhead
|
Originally posted by ERAUMAZDA Air tools ownz you. so i gotta use 130lbs of texas muscle! :D we'll see what I break first, the nut or my elbow... |
Not a prob :D
|
Originally posted by minclo so i gotta use 130lbs of texas muscle! :D :D |
buy a breaker bar
|
I just paid 48 dollars cdn for a 54mm prada socket with 3/4 drive. I was pissed, only place in the city that carried it.
|
Originally posted by razorback then your fucked :D |
Originally posted by ERAUMAZDA buy a breaker bar |
Originally posted by minclo :flipoff: you ste yourself up on that one..:D |
Originally posted by razorback then your fucked :D https://www.rx7club.com/attachment.p...postid=2840819 for thoes of you who are wondering, that is the cat off my geo metro xfi, and yes, it worked :D -Jacob |
evil forum
|
^ :rofl:
|
"that will work too" ^^
|
I got mine at O'reilys
They even gave me an employee discount b/c i own a rx-7 and they felt sorry for me so it was only like 25 bucks :) I asked for a 2 1/8 inch |
Originally posted by Sesshoumaru I asked for a 2 1/8 inch |
i rent them at my work.
|
i put the money on the flywheel nut....u aint gettin that sucka off...especially with 130lbs of texas muscle.....
|
you'd be surprised. I've already snapped a couple stubborn bolts and an extension bar. i'm getting that nut off one way or another
|
Originally posted by razorback http://www.sears.com/sr/javasr/produ...id=00947789000 its a 3/4 inch drive btw. http://content.sears.com/data/produc...782000-dlv.jpg Oh, get that socket, and get this sucker: http://www.sears.com/sr/javasr/produ...id=00904443000 To get a flywheel off when it's out of the car, put the engine on the ground, put the socket on the 3/4" drive wratchet, and STOMP on the sucker. It'll come off. |
i used a pvc pipe for my bar once and a FD cat (didn't have a metro one :))
my friend and I only used one hand. (yes it was on there good as the impact after 5 min didn't work) the pvc pipe was prolly 5ft LOL |
Originally posted by Barwick To get a flywheel off when it's out of the car, put the engine on the ground, put the socket on the 3/4" drive wratchet, and STOMP on the sucker. It'll come off. |
why dont you just a chizle and a hammer? worked for me
|
i may have to do that..my nut is fucked anyway..but it would be cool to own a big ass socket like that..
|
I used the sears socket and a 3/4 ratchett. Used a 6'pipe as a cheater bar and 215# of TX muscle and still nearly left my nut rolling around on the ground popping the bitch loose. Mine was still in the car so I took the hood off, used a small hand winch to twist my block forward and went at it from the top.
Razorback, I got a spare nut from an S5. Get me your address and I'll just mail it to you. |
All times are GMT -5. The time now is 11:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands