where can i buy a 1/8 hex BSPT thread pipe nipple for the oil pressure sender hole?
 

this is to tap my oil off of for my turbo coversion. cant find it anywhere. this sucks.

Hydraulic shop.

SummitRacing or Pegasus

awesome, im gonna use this:

https://static.summitracing.com/glob...atm-2269_w.jpg

just to convert the threads to what i need, then just use like a home depot pipe nipple off that, attached to a t fitting, with 1 end going to the turbo, and i end for the pressure sender. thanks.

You can also cut the mushroom head off of the stock sensor, toss that part and tap the remaining piece of it for 1/8" npt. You don't need to even drill it. Just insert the tap and start cutting threads.

if you do this doesnt the pressure sender no longer work??
i need that part to work too :-P

Doing the Trochoid idea you just tap the threads you want (in the cutoff original sender) and install a tee from Home Depot or Brasstite so you can use your old sender and the new one or whatever.

Not related to the above, http://www.pegasusautoracing.com/gro...D=PLUMADAPTBSP

$7.50 from Autozone
 

Gage adapter kit: one fit the oil pressure port (1/8-28 bsp) and another one fits the sub-zero (oil pan) temp switch port (M14 x 1.5). The adapter kit is made by Sun Parts #CP7573 (fyi 1.800.228.7667).

HTH,

Scott