RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   whats the highest boost possible and whats a good turbo? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/whats-highest-boost-possible-whats-good-turbo-534271/)

flaresniper 04-27-06 03:24 AM

whats the highest boost possible and whats a good turbo?
 
680cc primaries, 550 secondaries
stock s4 turbo and manifold with JDM intercooler
megasquirt

whats the highest boost i can run safely on pump gas, and whats the highest on race gas??

also, what would be a good turbo upgrade for me? im lookin for around 350 at the wheels max on pump gas.

RotaryEvolution 04-27-06 03:27 AM

some people run 20PSI on pump and some push 35 or more on race, are those safe? probably not but you didnt ask what a safe level is. boost levels are reliant mainly on the turbo, fuel system, intercooler and engine management. any turbo pushing 20 psi without correct corresponding mods will blow a motor.

you also cannot put down probably more than 270-280 to the wheels with those injectors before getting them near their max and i didn't even mention the fuel pump which i wouldn't push over 240 to the wheels on the stock fuel pump.

you could probably hit 350 to the wheels with a BNR stage 3 hybrid but it would be much easier to hit with a stage 4 and engine porting. this is just one mod though, there are many other factors you need to worry about to hit that mark.

DerangedHermit 04-27-06 07:38 AM

Safe? Stock. Can't get much safer.

SureShot 04-27-06 07:46 AM

What's with the 550 secondaries?
You must have an interesting Megasquirt map..

flaresniper 04-27-06 09:03 AM

yup. the fuel pump is a walbaro 255 so i think thats good to go. i was just curious what the stock turbo boosting is good up to before the intake temps get too hot and it becomes antiefficient

hondahater 04-27-06 09:07 AM

12 is the highest on a stock turbo. you can run higher boost with it but at that point it's just pushing hot air. To be curious why the larger primaries then secondaries? usually you want larger secondaries to compensate for the added boost up top but I guess you can do the same thing with the primaries......i guess.

flaresniper 04-27-06 11:59 AM

it might be the other way around, i just got the car a few days ago.

pretty much im lookin for a setup that could run around 350whp with the megasquirt, bigger injectors, and a FMIC on my stock engine.

hondahater 04-27-06 12:31 PM

your not going to hit 350 with that turbo and those injectors period. I would say 250 maybe 275 for that setup. your going to need either a bnr hybrid (www.bnrturbos.com) or a 60-1 full turbo upgrade. Also your going to need around 720x4 injectors or maybe even more. A good rule of thumb is to go to www.rx7.com and look at thier injector calculator and go from there.

snowball 04-27-06 12:50 PM

720 primary 1000cc secondary for safty i would say.

Carzy Driver 04-27-06 12:55 PM

wow 550 secondaries, what at 100% duty cycle??

Digi7ech 04-27-06 01:16 PM

It would be the same no matter what position since 2 of the 4 will be 680's.
If the 680's are actually in the primary position then he could actually run them by themselves for a little longer than 550's before turning on all 4.

Anyway.
For your setup. I would say 12psi is your safe limit.
550's can do about 10psi safely. I've hit12-15 before on 550's but I woudln't want to constantly run those numbers.
680's may give you that extra bit of fuel to run 12psi constantly.

A popular upgrade would be a T04 turbo for the 300whp range. Not sure on the exact one but I'd say E or B(Only seen R's around here so I don't know those numbers for sure).

Carguy34 04-27-06 01:31 PM

Hey Cal, nice work on picking up Tyler's car. It'll be a good car for you. Yeah, the primaries are 550 and the secondaries are 680. You shouldn't have any problem getting close to 300 HP with that, IMHO. You will want bigger injectors in the secondaries if you plan on going over 300. Also, the stock turbo is going to be a little too small to support that flow level. A 60-1 or any other large frame turbo is going to be more than you need for that power level. If you are planning on autocrossing or anything like that, I would recommend a hybrid upgrade on the stock turbo or and good quality smaller aftermarket turbo. I have a greddy that I would like to sell that you are welcome to if you are interested. I actually bought it from Tyler early last year. It's the turbo that he had on the silver car before he sold that one. The guy that owned the turbo before Tyler made 340 whp with it, so it'll support your goals just fine and it spools about the same as stock. I paid $500 for it with the manifold and wastegate, you could have it for that price if you are interested. I just bought a bigger turbo, which is why I don't need it anymore. I've got a Profec that I'll throw in for another $200. Anyway, here's what Tyler said about the turbo:

http://www.teamfc3s.org/forum/showth...hlight=td0619c

Later,
-B

Bukwild 04-27-06 01:50 PM

go ahead and call Kevin Landers at Roatry Resurrection and have him get a new motor ready for you because your going to need one.

Do a proper build with a full to4 or get real good at rebuilds with your power goals.

RotaryEvolution 04-27-06 03:28 PM

heh, i was thinking the same thing. choose who to listen to carefully or your motor will have an ill fated future.

fstrnyou 04-27-06 08:06 PM

haha, yeah, i remember the 20psi days. once i ported the wastegate and got a profec....12psi felt just as fast with much less fear of blowing things up.

BTW, one of the members on the megasquirt forums dyno'd his setup. I believe it was 274whp on a stock turbo with an FMIC. 550/1000 injectors at 85%/70% DC respectively. max boost was 10psi until 6200 when it started to fall off a little.

274whp at 10psi. so i guess 300whp shouldn't be much of a problem with a little more boost. but you'll need at least the same injectors that guy used. i'm going with a 720/850 setup which should work out to be the same.

hondahater 04-27-06 08:46 PM

thats funny I remember last month too, j/k :D boy you think 300 on stock turbo??? I know 275 but 300 on only 2 more pounds of boost is just asking a bit much! get a stage IV bnr and then tell me you want more power :) that thing is either braking my rear wheels loose in second at high rpms or my 6puck sprung clutch is slipping.

fstrnyou 04-27-06 09:40 PM

haha, i'd spin the heck out of my old kumho's in 2nd when 15psi hit, or 3rd gear if the roads were wet. with the kind of power you're talking about, you aught to be spinnin sticky tires in 3rd. sucks for me though, bought some sticky tires and now i can barely chirp them.

hondahater 04-27-06 11:35 PM

I got 10" wide falkens in the rear and 8.8" up front and I still break em loose very easily :) It's fun but my damn blow by issue is not :(

88rxn/a 04-28-06 12:11 AM


Originally Posted by hondahater
I got 10" wide falkens in the rear and 8.8" up front and I still break em loose very easily :) It's fun but my damn blow by issue is not :(


someday ill be there..someday..

hondahater 04-28-06 07:47 AM

haha i don't know if you wanna be here. Money, attention and lots of time has been spent to get her here and she still fucks with me...Constantly!

flaresniper 04-28-06 09:37 AM


Originally Posted by hondahater
haha i don't know if you wanna be here. Money, attention and lots of time has been spent to get her here and she still fucks with me...Constantly!


sounds like my wife :D

88rxn/a 04-28-06 10:37 AM


Originally Posted by hondahater
haha i don't know if you wanna be here. Money, attention and lots of time has been spent to get her here and she still fucks with me...Constantly!

i am def. already there!!! lol

hondahater 04-28-06 11:43 AM

lol yeah pretty much anyone with an rx7 that isn't 100% stock is probably with me :) And yeah flare you ain't jokin' maybe thats why alot of people like these cars, cause they remind us of women................Is that such a good thing????

88rxn/a 04-28-06 03:12 PM

woman and 7's
they both require lots of many and paitence...
they both can easily piss you off.....
when their hot they can please you easily :)
anyways...lol
here is my next turbo thats in the mail now....
its a Air research S4 stage 2 to4b intake AR.60 exhaust AR. 63 with a H trim wheel. the guy i got this from said it was a great turbo thats good for 320- 380 whp.
http://i26.photobucket.com/albums/c1...mynewturbo.jpg

7 freak 04-29-06 12:15 AM


Originally Posted by 88rxn/a
woman and 7's
they both require lots of many and paitence...
they both can easily piss you off.....
when their hot they can please you easily :)
anyways...lol
here is my next turbo thats in the mail now....
its a Air research S4 stage 2 to4b intake AR.60 exhaust AR. 63 with a H trim wheel. the guy i got this from said it was a great turbo thats good for 320- 380 whp.
http://i26.photobucket.com/albums/c1...mynewturbo.jpg

thats true! the ral true jajajaja! :wallbash:


All times are GMT -5. The time now is 05:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands