RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   What's the cheapest mod/repair you've done to your car? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/whats-cheapest-mod-repair-youve-done-your-car-507094/)

nickn505 02-06-06 07:41 PM

What's the cheapest mod/repair you've done to your car?
 
My moment of glory was when I bought one of those K&N filters you install into your stock air box. But when I installed it, it sounded exactly the same and had only a modest power increase that was barely noticeable. I remembered seeing a person's car in RX tuner mag where he had a K&N intake and drilled out the top of his air box. I wanted to do the same, but didn't have anything to cut it with and didn't want to. But the next morning, I had an inspiration. So I ran out to my car in my PJ's with a handfull of rubber bands. I took of the lid on the air box and secured the filter with the rubber bands!
Now I can really tell the difference and I hear a great throaty intake sound any time I floor it!
What cheap mod or repair have you done?

InMyWhiteTII 02-06-06 07:45 PM

My idle was pretty rough and there was some power loss, so I checked out my TID and it was cracked right at the turbo. Some duct tape patched that mother right up. This is a temp fix but it still counts i think

RoughRex 02-06-06 07:49 PM

LOL...OMG I'm so going out to my car with some rubber bands later.

red87tll 02-06-06 07:56 PM

just take a dremel and cut the center out of the top of the box. The part that says MAZDA. Works great.

Terrh 02-06-06 08:19 PM

ghettoest fix ever..... hmmm

wow, i can't think of one on my fc :(

torean 02-06-06 08:26 PM

my car was getting the shittest milage ever.....then i found out the o2 sensor was disconnected...plugged it in...drove like a grandma....its been getting 17-19 even with spirited driving every now and then

Valkyrie 02-06-06 08:30 PM

Car wouldn't start, pulled carpet in hatch, reconnected (the unplugged) fuel pump.

Car starts.

torean 02-06-06 08:46 PM

i got a million of them....car use to run pretty hot......then i realized dirt/oil had covered most of my AC condenser....took it out just leaving the rad....the temp has never been above 1/4 since....

Mura 02-06-06 08:56 PM

lol, wow. I'm going to try this rubber band thing out. But then there's the concern. By doing that, wouldn't you be pulling in hot air as well? Another ghetto mod that I saw someone do, The had shitty idle, so what they did was attach a spring to the throttle to keep it open a tad bit, thus, their idle while stopped at a light or even in neutral is perfect. It wasn't a big spring either.

loudazzrx7 02-06-06 09:12 PM

2.00 yankee candle air freshner,now the car smells so SWEET!

>edit: signature removed for size violation

speed_monkey 02-06-06 09:14 PM

coolant temp sensor.. last owner broke it and the car didnt run well, bought it for cheap and fixed it. haha

DragonRx7 02-06-06 09:46 PM

I washed the dirt off my car and improved my gas mileage. Dirt= the enemy of aerodynamics. :D

playdeadva 02-06-06 09:58 PM

when i first got mine my exhaust rattle loud as hell. so ilooked under and found the hanger the was off and put it back on. sounds nice now. a good 30 second mod.

uRizen 02-06-06 10:11 PM

The cheapest mods/repairs I've done so far are:

- Disconnected the OMP and switched to premix (ran noticably smoother, smells like a chainsaw... later fully removed OMP and injectors.)

- One of the wires on the BAC connector had been broken when I got it, so I just soldered it back up and used some good shrink tube to cover it.

- Fixed aux. ports by taking them off, removing the gunk in the little air holes that feed them, soaked the top in carb cleaner where the rod enters the actuator, then beat the shit out of the rod with a deadblow hammer until they moved... they now work very well. :D

classicauto 02-06-06 10:14 PM

oh man..........this thread is SOOO wrong in SOOO many ways........

RboYi 02-06-06 10:16 PM

radiator had air pockets in it, brought it to my work and used the coolant flush machine and now it struggles to even get to half temp. never knew it coolant flushes would help so much

CyborgRyu 02-06-06 10:17 PM

duct taping my intercooler coupler cause it was ripped.

RboYi 02-06-06 10:20 PM


Originally Posted by CyborgRyu
duct taping my intercooler coupler cause it was ripped.

hahah i did that on my integra when i had a turbo, worst thing ever. the piping would pop off everything i boosted halfway.

InABox 02-06-06 10:21 PM

2 Attachment(s)
on mines not that cheep or ghettoest, it was a new tire. that cost just over 100. everthing elles has been in the 100's, and 1000's.

MattB 02-06-06 10:25 PM

i vented my stock BOV to the open air and put a one way valve on it...it has a nice WHOOSH to it now...and i used parts from HOME DEPOT to make my intake :)

http://www.fortresshalo.com/wlan/gal...2483.sized.jpg

YES, the gold oneway valve on the BOV...and the home depot intake :)

-Matt

Mura 02-06-06 10:32 PM

I got stolen tires for $100....does that count?

RboYi 02-06-06 10:35 PM

heater hose broke. went to ace to get hose 2 ft worth, 1.99 per foot. told clerk it was 1 foot for 1 dollar. hahah napa wanted 30 dollars for it.

tekwiz99 02-06-06 11:01 PM

gee~ the keyword is "cheapest"

let me see~~~

how does cut away melted drain hose counts? see? THAT is like taking away from my car....

instead add onto it, i take away from it....

now nobody beats it

tr4c3 02-06-06 11:20 PM


Originally Posted by red87tll
just take a dremel and cut the center out of the top of the box. The part that says MAZDA. Works great.

I did this, but we used a razor blade, and it took forever. For-fricking-ever.

Tournapart 02-06-06 11:27 PM

hmm....sounds interesting


All times are GMT -5. The time now is 01:31 AM.


© 2024 MH Sub I, LLC dba Internet Brands