RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   What connectors are these?? Pics of car too (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/what-connectors-these-pics-car-too-178056/)

cbrock 04-19-03 10:10 AM

What connectors are these?? Pics of car too
 
There are 3 white connectors that are in the same loom as the main relay box. They don't connect to anything and I'm wondering what purpose they serve...ie can I cut them off and tape them back on themselves to clean up the wiring a little bit. There's also some updated pics of my car here

http://www.teamfc3s.org/forum/member...iew&car_id=307

It's still in winter/project mode, but hopefully I'll have it fired up later today or tomorrow. Still have to make the rear oil cooler line and remove more of the undercoating tar that the original owner had sprayed when he bought it new. WHAT A MESS.

TonyTurboII 04-19-03 12:11 PM

One of those is for the coil, so you cant cut that one.

cbrock 04-19-03 02:05 PM

Hmm, the coil plug is still connected. These 3 wouldn't have enough lack to even come close. Perhaps the FSM will shed some light on this.

AreExSeven 04-19-03 03:05 PM

What are the switch and plugs behind your rear plate?

Amur_ 04-19-03 06:26 PM

One might be AAS. That pic is too damn blurry. :(

cbrock 04-19-03 06:50 PM

I'll get a better picture after dinner. The plugs behind my plate are the charge terminals for the battery in the pass bin. Imagine trying to jump start the car without em. The switch is a kill switch to stay legal for all the racing sanctions.

cbrock 04-19-03 07:06 PM

yeah, I needed to resize it.

cbrock 04-19-03 11:05 PM

bump, looked in the FSM, but it's really hard to tell. Are they for the power steering? I have no ac or PS anymore and that's about the only thing I can think of that'd be on that side.

Turblown 04-19-03 11:28 PM

I believe the round one is for the starter/ oil/water temps senders for the dash, the big rectangle one is either for the ps or the a/c, I think its ps. That other one is not used on my car too. I just finished cutting every non used wire in the chassis harness and rewiring the whole charging system, and moving my battery in the back....

cbrock 04-20-03 08:12 AM

So as long as it's not one of the green connector ones, I'm probably okay to cut it huh? I'll hook everything back up and start the car before I remove it..better safe than sorry.

Turblown 04-20-03 11:24 AM


Originally posted by cbrock
So as long as it's not one of the green connector ones, I'm probably okay to cut it huh? I'll hook everything back up and start the car before I remove it..better safe than sorry.
Yea do that, and check which wires are hot so you can be extra extra careful with those ones.


All times are GMT -5. The time now is 03:44 AM.


© 2024 MH Sub I, LLC dba Internet Brands