RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   water pump upgrade? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/water-pump-upgrade-657927/)

upatnight 05-31-07 03:11 PM

water pump upgrade?
 
my pump is leaking. is thair an upgrade?

classicauto 05-31-07 03:30 PM

No.

There's *other ways* to do it, but no "upgraded" pump. And either way, flowing more coolant wouldn't necessarily be a good thing.

upatnight 05-31-07 05:22 PM

i was thinking something more reliable

classicauto 05-31-07 05:26 PM

Ive never in my years of owning 7's had a pump failure before.

If its leaking its probably the gasket, not the pump itself.

And either way, I'm sure there's exceptions, but like I said water pump FAILURE is a non-existant issue with these cars.

NZConvertible 05-31-07 06:21 PM


Originally Posted by upatnight (Post 6996983)
i was thinking something more reliable

Your pump lasted for 18 years and you want something more reliable? :Wconfused

teknics 05-31-07 06:26 PM

i wouldnt say non-existent, ive replaced a few that were leaking out of the weep hole (aka bad bearings, or busted bearing seal) hell my friends was so bad we couldnt even fill the car it started pouring out before it was even full.

kevin.

upatnight 05-31-07 08:33 PM

i have no idea where my pump came from or how hard it was worked befor i got it. i drive it hard and try to race 3-5 hours a week. im glad it didn't pop in the middle of a run. so far i have replaced everything else,and theres an upgrade for everything else so i asked.

RETed 05-31-07 10:01 PM

It's called an electric water pump (by Meziere).
It'll only cost you $1,000 and a lot of labor to put it in.


-Ted

NZ_87_TURBO 05-31-07 10:24 PM


Originally Posted by RETed (Post 6997933)
It's called an electric water pump (by Meziere).
It'll only cost you $1,000 and a lot of labor to put it in.


-Ted

Davies, Craig elec water pumps, you can buy complete bolt in ( you haveto supply hose ) setup for rotary with a flange etc that replaces the water pump
About $400-$500NZ if i recal right

RETed 05-31-07 10:49 PM

Is that unit made for street use?
I think the Meziere is the only one that claims it can be streeted.
Even the Stewart Warner units are not to be streeted.


-Ted

Turbo II 05-31-07 10:51 PM


About $400-$500NZ if i recal right
What's that in US dollars?

RETed 05-31-07 11:01 PM

The Meziere set-up is prices including the 13B flange, all SS AN (-16) hose and fitting, PLUS controller.
Ever priced -16 AN fittings and hose? :eek:


-Ted

SpAm@FC 06-01-07 02:57 AM


Originally Posted by Turbo II (Post 6998089)
What's that in US dollars?

300 - 370 USDollar...

micah 06-01-07 03:02 AM


Originally Posted by NZConvertible (Post 6997168)
Your pump lasted for 18 years and you want something more reliable? :Wconfused

Haha! No shit eh?



Originally Posted by classicauto
If its leaking its probably the gasket, not the pump itself.

Could be the weep hole... which means the seals are going out behind the impeller itself... but you knew that.


All times are GMT -5. The time now is 12:32 AM.


© 2024 MH Sub I, LLC dba Internet Brands