Wastegate adapter
I'm running the HKS manifold with a 38mm HKS wastegate. I really want to switch to the synapse wastegate. Does anyone know where I can buy an adapter for the 4 bolt square flange to the 2 bolt standard design. I've already checked with ATP and Himni neither show it on their website.
|
I'd like to suggest that you don't want to do that. The Synapse gate is 'junk' and cant handle rotary exhaust heat.
|
Sorry just found the part i was looking for on Banzai's website. Man gotta love those guys. I have another question now. On their website it states that it will perfectly fit a 44mm Tial wastegate but Synapse only makes a 40mm and a 50mm. Will the 50mm v band Synapse wastegate fit the 44mm Tial v band flange.
|
Well what do you recommend me going with?
|
Wait! Don't answer that question. I just read the specs on the MV-R from Tial and I'm definitely going with it!
|
Before you do all that get out a tape measure and check you have the room, i didnt.
You would need another piece of the puzzle which would turn the gate down instead of straight. I chose not to invest all that in my current set up and instead replaced the diaphragm in my hks gate. I used one from a hks copy and its been holding up great so far @20 lbs boost I would suggest you leave it alone |
The first question is: what's wrong with the HKS gate? Are you getting boost creep?
I run the MV-R 44mm Tial gate. It's working fine, but I decided to plumb the water cooling lines, which was a minor PITA. The Synapse 50mm V-band flanges are larger than the 44mm MV-R flanges. |
that hks gate is actually really good, sounds great too
|
All times are GMT -5. The time now is 03:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands