RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Want to buy stuff MazdaTrix can't get hold of (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/want-buy-stuff-mazdatrix-cant-get-hold-902399/)

jimmydanny 05-08-10 11:00 AM

Want to buy stuff MazdaTrix can't get hold of
 
Anyone know where I can get the following, the bigger parts in Europe preferred:
Seats and door panels, leather preferred
S5 front fender (what is the difference between the S4 and the S5 front?)
Fog lights
Original TII hood would be nice
S5 Cab rear lights, can only find coupe.
The warning light bezel thing, where I always put my phone :P dunno what it is called.

And, any way to find out if I got S4 or S5 engine? I think I got the S5, but I dunno really. As far as I know, the S4 got 180hp, and the S5 got 200. I like to think I got the S5.

And is it only me that got a rubber strip between the frond fender and the hood and sidethingy (from the door to the frond fender :P dont remember the name)

BurntOrangeT2 05-08-10 11:36 AM

Seats and door panels in europe don't know/prolly cheaper and easier to get in the FS section here.

Fenders are the same, but the molding is not. Again in Europe don't have clue

Fog Lights alot of people on this forum prolly have a extra set

TII hood same again, you can prolly see where this is goin by now, check the FS section and the regional FS parts of the board.

Cabin lights here, Warning Light Cluster would be pretty expensive new im sure so again here in the FS sections

Here in the States you can go through Black Dragon(google if needed) for body parts if you need to be new but it will cost ya. They can also get some of the other stuff you might need they have an online catalog

Someone will chime in on engine identification im sure

Don't know about the rubber strip.

arghx 05-08-10 11:54 AM

Just FYI for anyone reading this thread, you can call Ray Crowe @ Malloy Mazda. Malloy is a forum vendor and Ray has helped me get a lot of obscure stuff like a crank pulley and certain trim pieces.

(703) 490-8170 ask for mazda parts, then ask for Ray Crowe . I think he's there 8 - 4PM eastern daylight time , monday through friday . I'm pretty sure he does international shipping. Since the OP is in Norway he could call in the evenings after work or whatever and he will be there. A lot of the stuff mentioned in this thread may not be available anymore though. Full door panels are definitely not available at all, not even for FD's.

j9fd3s 05-08-10 03:20 PM

make sure you're sitting down when you get prices for stuff like seats..... they were in the $3,000 range new, when you could still get em

HAILERS 05-08-10 03:45 PM

There's a catalog company called BLACK DRAGGON??? I think that has some RX items. http://www.blackdragonauto.com/

Olli_H 05-08-10 03:49 PM

Hi

I have the turbo2 hood and the
"The warning light bezel thing, where I always put my phone :P dunno what it is called."
I m from Germany

thanks Olli

Rob XX 7 05-08-10 03:52 PM

keep in mind the time difference when you out of towners are calling in

jimmydanny 05-08-10 08:32 PM

I got some seats from a Prelude I will try to get stuffed in. So the seats might be okay for now :) But the door panels. I can fix them up myself (they are not that ugly), just by removing the speaker, getting new fabric and so. No stress.

Still the S5 tail lights, fog lamps is still wanted (can only find S5, and if I wont get the S5 front I need the S4 fog lamps)

Turbonut 05-08-10 08:40 PM

Fenders have a different part number S4/S5, and within the S5 there are 2 part numbers as the fenders with the spoilers have a different part number.

nycgps 05-08-10 09:49 PM


Originally Posted by j9fd3s (Post 9983667)
make sure you're sitting down when you get prices for stuff like seats..... they were in the $3,000 range new, when you could still get em

this is the part that I dont get Mazda.

I mean those seats are probably made 15-20 f-ing years ago and for f-'s sake I seriously dont think they worth like 3-4 K a piece even from MMS (I checked them just before)

I mean my FE's seats are 10 times more comfy and support my huge body better than them. if its 1-1.5K thats more reasonable.

But I dont know, consider a door panel cost like 1 K from MMS so 3-4K for seat sounds about right lol

Boosted11 05-08-10 10:20 PM

Well who in the right mind would want to pay 3g for uncomfy seats? You could get premium bride seats for cheaper, and be 10 times ahead in comfort.

To the OP... Some of the stuff you mention, your definitely better off going used and refurb.

nillahcaz 05-09-10 12:54 AM


Originally Posted by nycgps (Post 9984278)
this is the part that I dont get Mazda.

I mean those seats are probably made 15-20 f-ing years ago and for f-'s sake I seriously dont think they worth like 3-4 K a piece even from MMS (I checked them just before)


you pay Mazda for them just sitting taking up space in the warehouse, 20 years of utilities need to be paid some how.....

T2 vert 05-09-10 06:07 PM

I priced both seats for my '90 vert seven years ago, just a little under 10K


All times are GMT -5. The time now is 01:53 PM.


© 2024 MH Sub I, LLC dba Internet Brands