Vacuum question
In the attached image, the red line coming from the front of the UIM doesn't have vacuum. Is this boost only? I have an HKS racing BOV that has a port for vacuum and a separate port for boost. I already verified there is no vacuum from this line, so I am curious if anyone knows if it is a boost line. I am also curious about the red line coming out the back of the UIM because it doesn't have vacuum either.
https://www.rx7club.com/attachment.p...1&d=1242616856 |
1 Attachment(s)
Neither is vacuum. See the attached jpg of the purge valve and how the line going to its top goes to the throttle body to a source that is Prior to the butterflys.
On the back the only one that is vacuum is the bottom one. |
So if I want to hook up a tube for boost, those should work.
|
See the yellow line going to the boost sensor? Or the green line going to the bypass valve? Those will be the easiest sources for vacuum/boost.
|
I am actually using those. I am just curious if any of the lines only see boost.
|
You could always just tee a line from one that is vac/boost and use a check valve
|
All times are GMT -5. The time now is 08:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands