RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Used camera at work. New TE-37s, my TID, gauges, etc. (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/used-camera-work-new-te-37s-my-tid-gauges-etc-39561/)

BLUE TII 12-17-01 11:28 PM

Used camera at work. New TE-37s, my TID, gauges, etc.
 
rear dr. side exterior pic.

Erik 12-17-01 11:29 PM

looks tight dude! what width are the rims? and offset?

BLUE TII 12-17-01 11:31 PM

My cheap but nice TID mod! I love what this did for my car.

BLUE TII 12-17-01 11:34 PM

Greddy A/F and boost meter on my custom meter plate. I played around w/ lots of locations and this was the best for me for keeping an eye on A/F ratio at 150mph...

BLUE TII 12-17-01 11:37 PM

Turbo timer and ECU code warning LEDs location (I put my NAs manual mirrors on for simplicity)

BLUE TII 12-17-01 11:38 PM

Meter plate viewed through windshield...

BLUE TII 12-17-01 11:45 PM

Erik, they are 16x8 +30 in back and 16x7.5 +30 in front. I have a thread on them in wheels and tires section including details of fitment and driving impressions. I'll sneak another attachment in now- Interior showing gauges and timer locations-what else can I put by the turbo timer? Fuel cut switch mabye, fog lights-I need those still.

Node 12-17-01 11:50 PM

nice gauge spot. and nice car

BLUE TII 12-18-01 12:05 AM

Thanks, its my beater so I drive the F*** out of it- just like you should drive a sports car. I used the local coin-op hose wash and dried it by taking it up to 150 on the road behind my work before the pics.:p

Node 12-18-01 12:17 AM

what mods do you have to it?

BLUE TII 12-18-01 12:24 AM

RB downpipe/midpipe, TID mod, Walbro fuel pump, Pump rewire, Mazdatrix short shifter, Greddy turbo timer, A/F and boost gauges, ported wastegate, P/S, A/C and P/Mirrors removed, TE-37 w/ 225/50s, SS oil lines and stuff I can't think of currently...Next I want to get nice catback and Cusco comp II coilovers and all braces!

InitialD FC 12-18-01 12:28 AM

Hey man, where did you get that pod, or how did you make it, let me know, its really nice!

BLUE TII 12-18-01 12:34 AM

Made it w/ hacksaw, file, vise, hammer and black textured paint on my breaks at work. I like to work w/ my hands...(innuendo intended) Oh, yeah, Node- forgot ACT cluch and Indigo alum. flywheel.:D

RarestRX 12-18-01 12:35 AM

Yo,


It's your beater and you throw Volks Racing TE37 rims on it?! Damn, I wish I could afford some of those crappy rims for my pride and joy! *wink* I love TE37's!!

Here's the thread Blue TII started on his Volks:

http://www.rx7forum.com/showthread.p...threadid=39149

KS
1989 GTUs "I'll have 'em one day!"

BLUE TII 12-18-01 12:41 AM

Yes, amazing what one will do when one has messed up priorities. My nice clean sunny weather only car is my Honda; laugh at me, but its true!:rolleyes:

Node 12-18-01 01:13 AM

I hope its a respectable honda ;-)

Node 12-18-01 01:14 AM

just noticed they arent white TE37's
WOOHOO

BLUE TII 12-18-01 01:25 AM

'72 N600 GT, 15k miles, very nice shape.:) Not white TE-37, I like the subtle looks of darker colors.


All times are GMT -5. The time now is 02:51 AM.


© 2024 MH Sub I, LLC dba Internet Brands