trouble installing driveshaft
i just put a new transmision in my car and now im having trouble getting the driveshaft back on. i slid it into the trans but when i try to put it on the diff the bolt coming out of the diff is in the way. i had some trouble getting it off to but i just jerked it and it finally came out.thanks
|
It's pretty hard to discern what's going on here.
"the bolt coming out of the diff is in the way" What bolt? Is it one of the 4 flange bolts? If so, then let the parking brake loose, take the trans out of gear, spin the differential pinion flange, take out the bolt, then install the driveshaft. |
no those are out. there is a big gold bolt that comes right out of the middle of the diff on a stud between those four bolts. then the driveshaft has a little lip in the middle where it goes over the bolt the lip is in the way so i cant get it over the bolt. its really hard to explain. if the little lip wasnt there it would go on easy. i can get it over the bolt but not the extra little bit of threads that stick out from the bolt. it is literally ] [ that close like an 1/8 if an inch.
|
o-----o
---O--- o ----o i dont know if this helps but thats what it pretty much looks like. the four flange bolts and then a big ass one one in he middle. |
is it the stock drive shaft cause i remember when i took mines out in the stock drive shaft where it connect to the diff the is a slot for that gold nut so that it fits. or is it a custom driveshaft if it is then take the old drive shaft and take the end that goes to the diff and swap it out with the new one thats all i can think off hope it helps.
|
He's right. There's no way that a stock driveshaft is having that problem. Unless... does the slip yoke go ALL the way in? It may not be shoved in the tail of the transmission all the way?
|
I know what you are talking about, my driveshaft does the same thing.
Just play with it a bit and it will go back on. |
it is the stock driveshaft. the little groove for the gold nut is the problem. it has like a lip that sticks out and i cant get it over the gold nut.
|
All times are GMT -5. The time now is 12:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands