![]() |
tps- replace?
I am thinking that my tps is bad b/c:
1. Doesn't start up right sometimes (drops to idle in like 10sec) 2. It bucks for a second when you mash the gas quickly or let off quickly 3. Major power loss from 3900-5600rpm! ! :mad: NOT A HESITATION ANYWAY... Should I take a chance getting a used one, or should I get one new? How much are they? New and used? Thanks if you can help, Charles |
Charles,
Well first try adjusting the TPS and see if it's within spec. 2nd a full tuneup with plugs, wires, fuel filter, fluids, etc.. Also check the strainer/filter in the gas tank and make sure it's not clogged. |
Also, if you look at fc3spro.com, they have a section on adjusting the TPS with a multimeter, which is the most accurate way, as well as a telltale for wether or not you have a bad TPS, somthing the 2 lights cant tell
|
Re: tps- replace?
Originally posted by rotarypower86 I am thinking that my tps is bad b/c: 3. Major power loss from 3900-5600rpm! ! :mad: NOT A HESITATION Hope this helps! -Cyrus |
| All times are GMT -5. The time now is 09:27 AM. |
© 2026 MH Sub I, LLC dba Internet Brands