RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)

- - T04 ? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/t04-51002/)

penko

02-04-02 02:50 PM

T04 ?

If a t04b has a .60a/r exhaust a/r 1.00 divided .is that good or bad i'm shooting for 360rwhp on my t2

RETed

02-04-02 05:29 PM

Re: T04 ?

Quote:

Originally posted by penko
If a t04b has a .60a/r exhaust a/r 1.00 divided .is that good or bad i'm shooting for 360rwhp on my t2

You'll need to give us the trim on the compressor side (turbine side too if you can get it) by at least giving us the inducer and exducer diameters on the wheel.&nbsp Those numbers are meaningless at this point...

-Ted

BOOSTD 7

02-04-02 09:36 PM

You can probably assume it's the standard diameter, and either a P or Q trim. If so, it would be good for 360 ... just about any T04B should. But you do know that you'll need LOTS of other upgrades to support 360hp don't you?

penko

02-05-02 05:23 PM

Thanks for the replies,i have the fuel mods already the on ly thing left out is the i/c,i'm using the stock one with a 9psi spring wastegate.
Do you think it will work

All times are GMT -5. The time now is 08:42 PM.