swapping Cosmo RE into FC
 

ive searched but came up with alot of "can i put a cosmo RE into my N/A car" threads, lol.

i need to know if anyone sells an engine mount kit to fit an RE into my 88 tII? i assume the RE will bolt up to the s4 trans? would a s5 flywheel fit fine with no problems? (would i have to mess with changing counterweights?) i also plan on using my s4 waterpump housing to clean things up. anything else i should know?

Sounds like you have the basics covered. PM me and I'll dig up the link from where I got my mounts from.

banzai racing
japan2la
rpm (in Canada)

There are probably more, but those are three places that have them.

Josh

Contact Member "RPM" for mounts. With the mounts the motors bolts right in and the TII trans bolts right up. Yes the S5 TII 24lbs flywheel or FD3S 22lb flywheel is perfect for the motor.. All 1989 and up 13B tibo motors have the 9.0:1 rotors.. Bolt the flywheel on and go...

We carry many of the components needed to install a 13b-re in the FC: mounts, oil lines, block off plate kits etc

http://www.banzai-racing.com/products_cosmo.htm

We have also documented the complete conversion to our 91 vert, which may help answer many of your questions

http://www.banzai-racing.com/br_projects_vert_pg4.htm

Another useful link:
http://fc3spro.com/TECH/SWAP/COSMO/13b-re.html