still having trouble replacing oil lines....searched alot too
ok i've replaced the 2 lines that are connected to the manifold but the other 2 injectors on the block is a bitch to take off.
the ones on the manifold were easy to take off and i used a 14mm wrench on it no prob there i take the 14 to the other injectors and it's too small and when i got a bigger one it doesn't grab does anyone else have this problem?:confused: :confused: |
if you are removing them permanently just twist 'em off with vice grips, or see if you can get some needle-nose vise grips on it...if you're gonna reuse 'em, sand or grind the sides of the wrench till it's small enough to get in there...if you work on your car as much as I do, sooner or later you'll have a nice set of "homemade" skinny wrenches! LOL
|
lol awww man im gonna keep them i guess i have no choice but which wrench did you use?
|
lol awww man this sucks it looks like the side is start to strip damn it! what size of wrench did you use?
|
geez i hate double post some sort of lag must be causing it
|
if you've got a crow's foot set with a 14mm in it try that...if not, just grind down the wrench you used for the other two, you won't need to take too much off of it...it's the angle at which you gotta put the wrench on those things that messes with ya...
|
uggh it's driving me crazy i want to put it together already but i still need to buy a damn vac hose
|
plus i don't got a spare 14 to grind down
|
All times are GMT -5. The time now is 05:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands