RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   stereo wires? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/stereo-wires-178406/)

Madrx7racer 04-20-03 05:11 PM

stereo wires?
 
I need to know which color wire is for what. Myne was jacked and i got a new system and I want to install it myself, but i dont know which wire is for what and I was hoping you guys could hep.
Thanks

Icemark 04-20-03 06:11 PM

The search function is found in the upper right hand corner of this page. you could have helped yourself...

As posted 50 times before:

here's the radio wires again...

LTBlue/Red= 12v+
LtBlue/White= +Accessory
LtBlue/Yellow= - power ant trigger (not positive like all aftermarket radios- you must use a relay to invert the signal)
Red/Black= + Lumination
White=Factory Amp Turn on

Ground to the body, use the 10mm bolt behind the center console front drivers access panel. Do not use the Red/Black as ground it will damage the interior light circuit and dimmer in the car

Front Speakers (maximum of a 15 watt peak from the radio):
LtGreen/Red= Left
LtGreen/Black= Left

LtGreen= Right
LtGreen/Yellow=Right

Rear Speakers (if applicable, if you have the amplified rear speakers again the Maximum of 15 watts peak is all the stock speaker amp input can handle):
Brown= Left rear
Brown/White= Left Rear

LtBlue= Right Rear
LtBlue/Orange=Right Rear

Madrx7racer 04-20-03 06:21 PM

thank you

slackerhkr96 04-20-03 07:39 PM

as a general rule, light is your positive, black or darker wire is your negative


All times are GMT -5. The time now is 02:57 AM.


© 2024 MH Sub I, LLC dba Internet Brands