s4 with s5 full range tps wiring?
1 Attachment(s)
thought i had this all figured out until i went to wire it up
i have a s4TII i have swaped the s4 for the s5 throttle body with both narrow and full range tps. reason is iam switching over to a power FC. anyway i was using this thread to do it but my s5 tps has different color wires then what they have in there right up. Tps Pin Out / Wiring (stock Units) - NoPistons -Mazda Rx7 & Rx8 Rotary Forum my s4 tps has a: green/red orange black/red the s5 has: green/red orange black/red blue red yellow these are the wires on the tps not the harness the red blue and yellow are for the full range tps.. i just need to know witch is the power,ground and signal?? i tried to search but no luck and i only have the 87 shop book so its no use thanks in advance here is a pic just to help Attachment 627734 |
for any one who cares it's
S4 green/red signal(narrow) orange 5v (+) black/red ground (-) S5 green/red signal(narrow) orange 5v (+) black/red ground (-) blue ground (-) red 5v (+) yellow signal (full range) note s5 has two grounds and power one for each sensor |
Originally Posted by clean87
(Post 11893832)
for any one who cares it's
S4 green/red signal(narrow) orange 5v (+) black/red ground (-) S5 green/red signal(narrow) orange 5v (+) black/red ground (-) blue ground (-) red 5v (+) yellow signal (full range) note s5 has two grounds and power one for each sensor |
Originally Posted by clean87
(Post 11893832)
for any one who cares it's
S4 green/red signal(narrow) orange 5v (+) black/red ground (-) S5 green/red signal(narrow) orange 5v (+) black/red ground (-) blue ground (-) red 5v (+) yellow signal (full range) note s5 has two grounds and power one for each sensor |
All times are GMT -5. The time now is 09:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands