s-afc wiring harnass help
 

ok i went to pepboys and bought some electrical connectors that fit the pins on the back of my gen 1 safc . (i have to make my own harnass) what i need to know is what each of the 6 pins have to hook up too .
this is the back of the s-afc .

[ ] ( ) [- - - - - -]
the 6 pins on the right are where the wiring harnass connects to . if someone can tell me what 1-6 hook up too(ground,power,etc) , im as good as done

TIA

I can't tell you off the top of my head, but if you visit the Apexi website you can download the installation manual and all the info you'll need.

well that website works great IF i had a wiring harnass but i dont .
there are 6 pins . from what i gathered i'll only be hooking up 5 (throttle signal,air flow signal,ground,power, and rpm signal) what i need to know is what pins is wired into what e.g. pin 1 to throttle signal . pin one would be the first pin closest to the center of the unit , like in that half-assed diagram previously posted .