RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   rtek2.0/1.8 (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/rtek2-0-1-8-a-584076/)

12akid 10-04-06 01:03 AM

rtek2.0/1.8
 
whats the largest size injecters the rtek1.8 and 2.0 can handle??????

fc3sthebunta 10-04-06 01:46 AM

based on my experience, rtek 2.0 has pre-sets for dual 720cc's and i thin kthat your best bet would be contacting someone from the company

gxl90rx7 10-04-06 07:49 AM

Rtek 2.0 can lean up to 40% from stock fuel map (25% 720cc injector preset + 15% user setting). so theoretically it can account for 40% larger injectors from the stock 550's.

So that would be about 3667 cc's of injectors ((550 x 4)/60%), or say 720cc primaries and 1000cc secondaries (3440cc total)

12akid 10-06-06 03:56 AM

can i run 720ccp and 1000ccs with the 1.8rtek and get a safc, cause they say u can run higher then 720cc but need a fuel controler, ???????

jkimbro 10-06-06 09:40 AM

rtek 1.8 is controlling 4x720's as is.....so, yes, you can tune down 1000's in the secondaries with an safc.

bebiracer 09-01-07 04:44 PM

how about 720 prim and 1680 sec?? can i use a rtek 1.8 and a safc

Hyper4mance2k 09-01-07 05:22 PM


Originally Posted by bebiracer (Post 7294186)
how about 720 prim and 1680 sec?? can i use a rtek 1.8 and a safc

you probably could, but you'd gain 50 more hp with stand alone.

AUGieDogie 09-02-07 12:13 AM

If you are going to buy the 1.8 AND an SAFC why not just spend a few more bucks and get the 2.0. You can do all of the fuel adjustment and so much more with it.

As far as the 1680s, you can shoot off a message to the guys at digitaltuning, they are pretty good about getting back to you right away. Might be pushing it though......

gxlbiscuit 09-02-07 05:30 AM

overkill on those injectors sell them..... dont know why the rx7 world is obseesed with big injectors i have my injectors running at 51lbs of pressure.


All times are GMT -5. The time now is 09:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands