reverse vented hood??
 

does the reverse vented hood suck the air in over a v mount setup? if so how well?

It pulls the air through when properly ducted.

If you run a vmic you need a vented hood.

reverse vented hood?

Are you talking about a hood with an exhaust vent on the top or a hood with a cowl induction inlet at the rear?

this hood

Regular vented hood... They vent the hot air out from the engine bay over the hood. Works well in combination with a VMIC with proper ducting.

Riz.

Yes, that hood will help air flow through an intercooler, especially if a duct is installed between the intercooler and the hood outlet vent. It will work with a typical front-mount, v-mount, or horizontal-mount setup. Even when the car is not moving, natural convection could help suck air through the intercooler.

what kind of ducting? anyone got a sample pic

You can use metal, composite, high-temp plastic, or similar materials for ducting.

Pictures of composite ducting:
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/pics-blue-tiis-awesome-engine-setup-hfmic-145822/

^^ He has a VMIC w/ no vented hood. Works great he says.