removing the damn wing...
 

im removing the stock S5 wing to install my RE-amemiya wing. and theres two bolts, one on either side that i dont know how to remove.

theres the two 10mm nuts on the rear of the wing, and the two screws on top on the sides of the wing. and on either side in between those, theres something... not sure what it is. i can get my hands on it, and its neither a nut or a bolt. do i pry it off?

no guesses, only reply if you have removed these...

Theres a large plastic screw on both sides that you need to take off. You can use your fingers for it. That should be what you're talking about.

yeah, i can feel them and they feel plastic. and the should just screw off?

thanks.

The two at the front should pry off, if your fingers cant get it get alil tiny flathead?

The caps?

no, removed the little caps and the screws underneath them. thats not the problem.

im talking about the ones you have to get from underneath and few inches away from there.

Oh sorry man.

Use a mirror to take a look at them. As I recall, there is something you need to twist from underneath to release the fastener. Don't pry on them! Take a look at the parts fiche and maybe you can see what I mean.

got it off, they were just mad tight...