Removed Air Pump: What To Do With Boost Sensor?
 

Got my car running but dont know what to do with the boost sensor? Did not no where to put it since i blocked off the thing it goes to. Any ideas?

If we're talking about the boost/pressure sensor by the passenger side shock tower (black box) then I just put it to vacuum. That's on my N/A though.

The boost/pressure sensor should not have been effected by your airpump removal.

It needs to connect to a vacuum port on the intake manifold.

I took off the orginal thing it connected it to and block it off with a plate. I do not know where to connect the vaccum line for a good reading. Have it on one of the copper lines but not getting a good boost reading i will just have to buy a aftermarket gauge like defi.

I connected it to the point where the line of the stock "BOV" is connected to.
Above the copper lines you mentioned, at the inlet manifold.

-Patrick

Options:

1. [*]
2. [*]

https://www.rx7club.com/attachment.p...hmentid=118531

Thanks