Rebuild kit question (need help identifying items)
Ok guys I'm having Don Marvel of marvelspeed.com rebuild my engine and thought I would shop around and see if I can get the parts cheaper than he can...heck its worth a try :) I was looking at the kitb from Atkins Rotary and got really confused so here it goes:
Here is a list of what I am told is needed: 6 Apex seals (This I know comes in the kit B) 6 apex seal inner springs (there kit just says seal springs...) ????? 6 apex seal outer springs (there kit just says seal springs...) ????? 12 side seals (kit b) 12 side seal springs (I was told to get the 93-95 model of these) 12 corner seals (kit b) 12 corner seal springs (I was told to get the 93-95 model of these) 4 oil seal sets (not sure if this comes with the kit or not) 4 inner oil seal o rings and springs (not sure if it comes with the kit) 4 outer oil seal o rings and springs (not sure if it comes with the kit) 1 rear orange seal (not sure if it comes with the kit) 1 front cover seal (not sure if it comes with the kit) 1 overhaul gasket set (comes with the kit) 1 bac hose (not sure if it comes with the kit) oil level sensor oil ring (not sure if it comes with the kit) I was looking at the KitB from Atkins and I see that it includes the following: Overhaul gasket set Apex seal Apex Seal Springs Corner Seal Springs Corner Seal Plug Corner Seal Side seal springs Side seal Oil control Ring Rubbers Oil control Rings Metal Front Main Seal Rear Main seal Pilot Bearing & Seal Thermal Pellet Replacement Hylomar sealant So can you guys help clarify some of the questions I have here. For instance do the following items come with the kit: 4 oil seal sets 4 inner oil seal o rings and springs 4 outer oil seal o rings and springs 1 rear orange seal 1 front cover seal 1 oil level sensor oil ring And if they do come with the kit and you tell me what is what so I can mark it off the list. I'm trying to compare the price I can get it for compared to what it will cost it he gets the parts for me. BTW I also need these parts...no a good place to get them? 1 upper radiator hose 1 lower radiator hose 1 long heater hose 1 lower turbo water hose 1 water hose from back housing to thermo wax valve 1 clutch disk |
4 oil seal sets = ATKINS Oil control Rings Metal
4 inner oil seal o rings = ATKINS Oil control Ring Rubbers 4 outer oil seal o rings = ATKINS Oil control Ring Rubbers 1 rear orange seal = ATKINS Rear Main seal 1 front cover seal = ATKINS Front Main Seal So if you get the Atkins kit you are describing, you will still be short a set of oil control ring springs (4 inner, 4 outer) and 1 oil level sensor oil ring. However, you should be able to reuse your oil control ring springs again, unless they are in really sad shape or don't meet the Mazda specs for assemply clearance. And I wasn't aware there was a "oil level sensor oil ring" to replace... Also, a good place to get all your water hoses and clutch disk: http://www.mazdatrix.com if you want to pay list price http://www.mazdaformance.com if you want a discount ;) Regards, Shawn |
All times are GMT -5. The time now is 07:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands