Rebuild cranks...not gettin fuel
My rebuild cranks over, but it won't start. I am getting spark. I know I am not getting fuel because I don't smell fuel after 15-20 seconds of cranking. My SAFC-2 shuts off while cranking...is it supposed to do this? I wired it to the ign wire on the ecu like the instructions said to....HELP ME!!!
|
also, I didn't set any fuel values yet on my SAFC-2. Will it run like stock or will it not run at all?
|
Well the fact that the SAFC-2 is shutting off while cranking isn't the problem, I hardwired it to the battery and tried to start it and still no luck
|
You had it wired right the 1st time. Anyway I had a similar problem with my rebuild. My problem ended up being shoty injector plugs. I took the UIM off and unbolted the fuel rail and held the injectors on with my fingers while the palm of my hand put pressure on the back of the injector plugs. I then could see the injectors firing while my wife turned the engine over. If your injector plugs look kinda shotty maybe just replace em with new ones. I got mine from RX7.com they were $15 each. Hope that helps.
|
All times are GMT -5. The time now is 05:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands